YUY-F
CE
Horizontal
Electric
Stainless Steel
Water
No Leak
Petrochemical
ABB Motor
YUY
Woodencase
CE, GMP
China
8414100090
Product Description
Specifications :1)Application:Belong to a turbine the diversion centrifugal pump can
extract the liqiud of the vacuum tank under the pressure of negative pressure 0.09Mpa .
2)Spec:3T-180T,0.75KW-75KW
Material:SUS304 SUS316L
the pump body,pump cover,impellerwhich is contact with medium material ,made of stainless steel SUS316L and SUSI304
Standard:DIN, SMS
Impeller:Open type impeller ,semi-close type impeller
Surface treatment:The parts contacted with medium is polished
Working condition;sanitary centrifugal pumps is a high and low level transmission ,as well as the level transmission ,
and has a amount of suction .
The max pressure of inlet:0.5MPa
Temperature range:-10°C to +140°C(EPDM)
washable mechanical sealing:
water pressure:Max 0.1MPa
3)Motor:
1. Configuration of "ABB" brand three-phase AC motor is in accordance with the International Electro-technical CommissionIEC60034.IEC60072 standard design comply with European "CE" marking requirements
2. The explosion-proof motor also available ,that can meet with the requirement of different applications .
3.It with excellent electric performance ,and with low noise,low vibration,
the protection grade is IP55,insulation grade is F.
4 .Operate in voltage:
≤3Kw,220-240V/380-420V,/Y
≥3Kw,380-420V/660-690V, /Y
5.frequency:50Hz/60Hz
6. working method:continuous(SI)
7.rotate speed:the standard rotate speed is 2900r/min
4)Instruction of the YUY sanitary negative pressure pump
For example:
YUY-F- B-2.2- 10- 24- M
| Technical Parameters | |
| Flow Medium Parts | AISI304/AISI316L(1.4301/1.4404) |
| Without Flow Medium Parts | AISI304(1.4301) |
| Outside Surface | Semi bright |
| Inside Surface | Polished Ra0.4 |
| Product Wetted Seals | EPDM,Silicone,FPM.NBR |
| Max.Inlet Pressure | 0.5MPA |
| Temperature Range | -10ºC~140ºC |
| Noise Level(At 1m) | 60-80dB(A) |
| Capacity | 1.5~200ton/hour |
| Motor | ABB Motor and China motor, Siemens |
| Voltage | 220V,380V,440V,480V,etc |
| Impeller Type | Closed Impeller, Open Impeller, Semi-Open Type Impeller |
| Connection ends | Tri clover, butt weld, threaded, union and flange |
| Mechanical seal(standard) | plumbago&silicon carbide |
| Specification: | 3T-180T, 6m-60m, 0.55KW-75KW |
| Material: | SS304 SS316L (The pump body, pump cover and impeller) |
| Impeller: | 1.Open type impeller, there is no blind corner;2Close type impeller;3. Semi-open type impeller |
| Operate condition: | Sanitary centrifugal pump is close to HORIZONTAL transport of high and low level, is not the Self-priming type. |
| Surface treatment: | The part contact with medium is Polished, And another part is Sand Blasted |
| Max inlet pressure | 0.5MPa |
| Temperature range: | -10 to Degree +140 Degree |
| Flushable mechanical sealing: | Water pressure: __Max 0.1MPa Water lift: ___0.25-0.5L/min |
| Standards: | DIN \ SMS |
