parameter:
| specification | XZ36-6×230 | XZ36-6×270 |
| Speed for spindle | 500,700,900r/min | 500,700,900r/min |
| Diameter of roller shaft processed | Φ18~Φ60mm | Φ18~Φ60mm |
| Length of roller shaft processed | 200~2300mm | 200~2700mm |
| Processing shaft groove width | 6~45mm | 6~45mm |
| Cutting depth | 0~5mm | 0~5mm |
| Spindle motor | 3kW×2(SET) | 3kW×2(SET) |
| Oil pump motor | 5.5kW | 5.5kW |
| Hydraulic system Working pressure | 1.5~4MPa | 1.5~4MPa |
| Hydraulic System Flow | 31L/min | 31L/min |
| Cooling bump motor | 125W×2 | 125W×2 |
| Equipment size | 4050mm×1300mm×1600mm | 4450mm×1300mm×1600mm |
main performance
A.it's a automatic machine to produce the oblate slot of the both sides
through clamping the roller carrier shaft which used in the conveyor roller.
B.There are four spindle boxes in the machine,and each spindle
box spindle box spinning processing with one milling cutter.
C.Suitable environment temperature:0-40ºC
D.No corrosive medium and dust occasion
Main performance and application
This machine is an automatic equipment which could process the two ends of the belt conveyor roller shaft by a single clamping, which could meet the requirements of the processing of roller shaft produced both at domestic or abroad.
Because every roller shaft has four grooves, the machine has four spindle boxes, a milling cutter is drove by a spindle box to process a groove.
Workpieces are clamped pm the V-shaped iron by hydraulic. Droved by hydraulic, the four spindle boxes move up and down when processing, to realize fast forward, work into (cutting) and fast backward. The electronic control system applied imported programmable controller (PLC) as the center for process control, which with high degree of automation, high efficiency and reliability. It's suitable for volume production of roller shaft.
