RH-EC-5T
Bridge Type
Resistance Strain
4-Wire
Digital Type
Corrosion Resistant
Normal Wirewound
Stainless Steel
IP67
CE
Non-Customized
Clamped on Wire Rope Tension Load Sensor
Dia8-18mm
5000kg
Overload Limiter
8m
UTE
Carton+Pallet
10pcs/carton, 22kg
Ningbo China
8431310090
Product Description
Clamped on wire rope load cells
The clamped on wire rope tension transducer RH-EC series is a low cost load cell specially designed to measure the tension force on hoisting or crane wire rope. Easy installation does not require the hoist to be dismantled nor modified, and RH-EC rope load sensor covers a large range of rope from 8 to 21 mm in diameter and loads of 2000kg to 5000kg individual rope (under the condition of roping:1:, the lifting capacity depending on the rope reeving falls) Together with a load control unit (OMS-370C, SUMT-QZX(B),OMS-350, OMS-160) and a digital display scoreboard, this wire rope clamped load sensors constitute a complete overload control system for visualizing and continuously monitoring loads and detecting overloads
Application:
The wire rope load cell sensor is recommended for measuring load and overload to ensure the safety of industrial lifting installations, overhead cranes, winches and hoists. It is perfectly suitable for implementation on existing lifting systems in order to upgrade in compliance with actual safety standards without any heavy modification. It is recommend to be used with a overload control unit (OMS-370C, SUMT-QZX(B)) easily coupled with a LED digital display scoreboard with 9 digits or 6digits (red colour)
Features:
The clamped on wire rope tension transducer RH-EC series is a low cost load cell specially designed to measure the tension force on hoisting or crane wire rope. Easy installation does not require the hoist to be dismantled nor modified, and RH-EC rope load sensor covers a large range of rope from 8 to 21 mm in diameter and loads of 2000kg to 5000kg individual rope (under the condition of roping:1:, the lifting capacity depending on the rope reeving falls) Together with a load control unit (OMS-370C, SUMT-QZX(B),OMS-350, OMS-160) and a digital display scoreboard, this wire rope clamped load sensors constitute a complete overload control system for visualizing and continuously monitoring loads and detecting overloadsApplication:
The wire rope load cell sensor is recommended for measuring load and overload to ensure the safety of industrial lifting installations, overhead cranes, winches and hoists. It is perfectly suitable for implementation on existing lifting systems in order to upgrade in compliance with actual safety standards without any heavy modification. It is recommend to be used with a overload control unit (OMS-370C, SUMT-QZX(B)) easily coupled with a LED digital display scoreboard with 9 digits or 6digits (red colour)
Features:
- Simple, robust and precise wire rope measurements.
- fast and easy mounting
- Without change of machinery,Specially designed for retrofitting in existing crane
- equipment
- in shortest time
- Suitable cable diameter from8-36mm
- Stainless steel construction
- Easy to mount directly on fixed point of cable ▪ Reliable and economical IP 67 protection class
| Wire rope tension sensor : RH-EC | |||
| Rated load | 2T/3T/5T | Ultimate overload | 200% F.S |
| Wire rope diameter | 8-22mm/18-36mm | Total error | ±0.5%F.S |
| Sensitivity | 2.0±0.02%mV/V | Material | Alloy Stell |
| Excitation voltage | 5-12VDC | Cable Length | 8/9m |
| Input impeance | 760±10Ω | Creep error | ±0.02% F.S. |
| Output impedance | 700±2Ω | TC SPAN | ±0.02%F.S/10ºC |
| Insulation impedance | ≥5000MΩ | Working temperature | -30ºC~+70ºC |
| Safe overload ratio | 150%F.S | Protection class | IP67/IP68 |
Clampled on the steel cable work with controller to compose the overload load limiter
