RS232 Truck TPMS Internal Band Sensor for GPS GPS Tracker Telematics Integration

RS232 interface TPMS Solution Bandage Sensor for GPS GPS Tracker and other RX TX Wires Telematics Integration Bandage Sensors are more stable and reliable for large vehicles such as mining trucks earthmovers, CATER and KOM vehicles,bandage tie length can be customized for specific applications.

The Development Kit is supplied with a RS232 circuit board for connection to PC, and power supply, Details of the communication protocols are provided to enable it to be integrated with existing instrumentation, telematics or security applications.

 
Application
The system requires engineering expertise to programme it into the host system, so it is appropriate for equipment manufacturer applications. It is not supported for individual retail customers.
 
Wireless direct tire pressure gauge and monitoring system for large off-road vehicles such as mining & construction,earthmover,container & cargo handling equipment and transit systems.
 
The innovative Tire Pressure Monitoring System ensure and help decrease your downtime and reduce your operating costs by giving you accurate tire pressure data.It also help you improve fuel efficiency,increase tire life and keep you moving.
 
Key Specifications/Special Features
Internal Sensor for tubeless tyre installation (external sensor available optional)
TPMS receiver communicated to dashboard via UART port of RS232
We can provide communication protocol  
When more than 12 tires using two repeaters to insure good signal transmission quality     
Convertible pressure unit, bar/psi 
High/low pressure, slow/fast leakage, high temperature, low battery alarm, sensor failure alarm via GPS
Real-time tire data monitoring              
Visual/audible alarm   
Wireless transmission                   

Each TPMS Kit will include:
RS232 receiver: 1 piece
Repeaters: 1 pc
Band sensor for internal tubeless tyre installation:6pcs(Price is based on a 6-wheel vehicle)
Band Tie:6pcs usually band length is 1680mm,if need a customized Band,freely let us know.

Sensor:
Battery Mode CR2450(550mAh)
RF Frequency 433.92 MHz±38 KHz
Standby Current:<0.7 uA
Emission current:<10 mA
High frequency transmitting power:<8 dbm(50Ω)
High frequency modulation mode:FSK
Low frequency receiving frequency: 125 KHz±5 KHz
Low frequency modulation mode:ASK
Pressure measurement range: 0-13 bar
Pressure resolution: 2.75 KPa
Pressure measurement accuracy 
±0.2 bar(0ºC~70ºC)
±0.3 bar(-20ºC~85ºC)
±0.48 bar(-40ºC~125ºC)
Temperature measurement range:-40ºC~125ºC
Temperature resolution:1ºC
Temperature measurement accuracy:±3ºC(0ºC~70ºC)
Operating temperature range: -40ºC~125ºC
Storage temperature range:-40ºC~125ºC(It is recommended to store at room temperature)
Protection level:IP67
Battery life:More than 5 Years
Sensor Weight:43.4±1g

RS232 receiver:
Operating frequency: 433.92MHz ±68kHz
Operating voltage: 9-24V DC
Operating current: ≤20mA
Static current: ≤10mA
Operating temperature: -40 to 80°C
Communication: UART
Baud rate: 19,200kbps
RF receiver sensitivity: ≥105dBm

Repeater:
Operating frequency: 433.92MHz ±68kHz
Operating voltage: 9-30V DC
Operating current: ≤50mA
Static current: ≤10mA
Operating temperature: -40 to 80°C
Storage temperature: -40 to 125°C
Power supply: trunk power
RF transmitter power: <10dBm
RF receiver sensitivity: ≥105dBm
Default warning value:
Low pressure alarm threshold default: 7.5bar/109psi
High pressure alarm threshold default: 12.5bar/181psi
High temperature: 75°C