8040/4040
Tubular
RO
225psi
99.5%
FROTEC
Carton or Pallet
8040
Made in China
8421999090
Product Description
FROTEC ULP-8040 / ULP-4040 low pressure membrane
FROTEC ULP-8040 / ULP-4040 elements can produce high-quality water at low operating costs. They are ideal for use in large-scale industrial and municipal water treatment systems.
FROTEC ULP-8040 / ULP-4040 elements can lower the operating pressure by 40%.
Suitable for:
new-built or existing RO systems.
municipal and industrial water demineralization system.
various operating conditions with 4″and 8″elements.
Product Specifications
| Model | Active Membrane Area ft2(m2) | Stabilized Salt Rejection % | Minimum Salt Rejection % | Permeate Flow Rate gpd(m3/d) |
| ULP-8040 | 400(37) | 99.3 | 99.0 | 11,500(44) |
| ULP-4040 | 78(7.2) | 99.3 | 99.0 | 2250(8.7) |
Test Condition: Feed Water Pressure 1.03MPa (150 psi); Feed Water Temperature 25 °C (77 °F); Feed Water Concentration 2,000 ppm NaCl; Feed Water pH 7; Permeate Recovery 15%.
Dimensions
| Model | A inch(mm) | B inch(mm) | C inch(mm) | D inch(mm) |
| ULP-8040 | 40(1,016) | 0 | 1.125(29) | 7.9(201) |
| ULP-4040 | 40(1,016) | 1.05(26.7) | 0.75(19) | 3.9(99) |
Operation Condition
Maximum Operating Pressure 41 bar(600 psi) Maximum Operating Temperature 45ºC(113ºF)
Maximum Pressure Drop per Element 1.0 bar (15 psi)
pH Range, Continuous Operation 2-11 pH Range, Chemical Cleaning 1-13
Maximum Feed Silt Density Index (SDI15) 5.0 Free Chlorine Tolerance < 0.1 ppm
Note
- Permeate flow rates for individual elements may vary ±15%.
- Membrane active areas may vary ±4%.
- Stabilized salt rejection is generally achieved after continuous using for 24-48 hours, which depending on feed water qualities and operating conditions.
FROTEC BW-8040 / BW-4040 high pressure membrane
FROTEC BW-8040 / BW-4040 elements can separate salts from water and increase permeability while offering superior salt rejection. They are ideal for use in large-scale industrial and municipal water treatment systems.
FROTEC BW-8040 / BW-4040 elements can lower the cost of desalination by improving energy efficiency and productivity significantly.
Suitable for:
new-built or existing RO systems.
high quality permeate while minimizing unit cost.
various operating conditions with 4″and 8″elements.
Product Specifications
| Model | Active Membrane Area ft2(m2) | Stabilized Salt Rejection % | Minimum Salt Rejection % | Permeate Flow Rate gpd(m3/d) |
| BW-8040 | 400(37) | 99.5 | 99.0 | 10,500(40) |
| BW-4040 | 78(7.2) | 99.5 | 99.0 | 2,050(7.8) |
Test Condition: Feed Water Pressure 1.55MPa (225 psi); Feed Water Temperature 25 °C (77 °F); Feed Water Concentration 2,000 ppm NaCl; Feed Water pH 7; Permeate Recovery 15%.
Dimensions
| Model | A inch(mm) | B inch(mm) | C inch(mm) | D inch(mm) |
| BW-8040 | 40(1,016) | 0 | 1.125(29) | 7.9(201) |
| BW-4040 | 40(1,016) | 1.05(26.7) | 0.75(19) | 3.9(99) |
Operation Condition
Maximum Operating Pressure 41 bar(600 psi) Maximum Operating Temperature 45ºC(113ºF)
Maximum Pressure Drop per Element 1.0 bar (15 psi)
pH Range, Continuous Operation 2-11 pH Range, Chemical Cleaning 1-13
Maximum Feed Silt Density Index (SDI15) 5.0 Free Chlorine Tolerance < 0.1 ppm
Note
- Permeate flow rates for individual elements may vary ±15%.
- Membrane active areas may vary ±4%.
- Stabilized salt rejection is generally achieved after continuous using for 24-48 hours, which depending on feed water qualities and operating conditions.
