CRNGO
Non-oriented Silicon Steel
GB, AISI, ASTM, DIN, BS, JIS
Cold Rolled
Steel Coil
508mm
0.10mm,0.12mm,0.15mm,0.17mm
820±20ºC
1.5 to 2.5 Hours
Rapid Heating or Cooling Should Be Forbidden
Nitriding and Oxidation Atmosphere Must Be Avoided
200~1500mm
3~8t
Yahe International
Standard Sea Shipping Packaging
Steel Coil/Sheet/Strip
China
7225190000
Product Description
Silicon steel, also known as silicon steel Sheet or Electrical Steel, it is a ferro-silicon soft magnetic alloy steel with very low carbon content, usually containing 0.5% to 4.5% silicon. The addition of silicon can increase the resistivity and maximum permeability of iron to reduce the coercivity, iron loss and magnetic aging.
The difference between oriented silicon steel and non-oriented silicon steel
Non-oriented silicon steel: ferro-silicon alloy with very low carbon content. In the deformed and annealed steel sheet, its grains are distributed randomly. The silicon content of the alloy is 1.5% to 3.0%, or the sum of the silicon and aluminum content is 1.8% to 4.0%. The products are usually cold-rolled plates or strips, which are mainly used to manufacture motors and generators.
The difference between oriented silicon steel and non-oriented silicon steel
Non-oriented silicon steel: ferro-silicon alloy with very low carbon content. In the deformed and annealed steel sheet, its grains are distributed randomly. The silicon content of the alloy is 1.5% to 3.0%, or the sum of the silicon and aluminum content is 1.8% to 4.0%. The products are usually cold-rolled plates or strips, which are mainly used to manufacture motors and generators.
