NDG 0501
ISO
Aluminum Alloy
Vilun
Carton and Pallet or According to Your Requirement
ASTM A 475 ISO9001: 2008
Changchun, Jilin, China
7326209000
Product Description
Specifications1. Preformed dead end
2. Aluminum alloy
3. Grip strength: 95%RTS
4. Strength: 70, 100, 120KN
5. ISO 9001: 2008
Aluminum alloy dead end grip with insulation coating for telecom cable, insulator conductor
For telecom cable, fiber cable, TV cable, Digital cable
The aluminum alloy dead end grip with insulation coating has the main function to fix a pole/tower the cables, conductors, strands, structures, insulators, etc.
The area of the loop always must be protect with a suitable thimble, pulley, insulator etc.
Vilun has created a denomination that will allow us to recognize the accessory. The denomination for the
Dead-end Grip is the following: With first letters meaning the product DGG(Dead end Guy Grip), Two letters meaning raw material which they are made from. AL (Aluminium alloy),
AC (Galvanized steel), AW (Aluminium Clad Steel-ACS), CW (Copper Clad Steel-CCS), AA(Aluminized steel),
SS(Stainless Steel). And with two series of three numbers, they show the diameter range of the specified
Conductor.
Example:
Galvanized steel Dead-end Guy Grip for a cable with a diameter range from 9, 31 to 9, 99 mm
The rods of the fitting are refaced in the ends to avoid damages in the application and to the
Specified cable.
The inside of the dead end is gritted with a non-slip material.
The Aluminium Alloy dead-ends coated have the main function to fix the messenger cable to a pole,
To the structure, front of a house, etc. The area of the loop always must be protected with a suitable
Thimble.
TOLERANCES: LENGTH -10mm-+20mm.
RAW MATERIAL: ALUMINIUM ALLOY
Be used for: Insulated conductor, Telecom cable
2. Aluminum alloy
3. Grip strength: 95%RTS
4. Strength: 70, 100, 120KN
5. ISO 9001: 2008
Aluminum alloy dead end grip with insulation coating for telecom cable, insulator conductor
For telecom cable, fiber cable, TV cable, Digital cable
The aluminum alloy dead end grip with insulation coating has the main function to fix a pole/tower the cables, conductors, strands, structures, insulators, etc.
The area of the loop always must be protect with a suitable thimble, pulley, insulator etc.
Vilun has created a denomination that will allow us to recognize the accessory. The denomination for the
Dead-end Grip is the following: With first letters meaning the product DGG(Dead end Guy Grip), Two letters meaning raw material which they are made from. AL (Aluminium alloy),
AC (Galvanized steel), AW (Aluminium Clad Steel-ACS), CW (Copper Clad Steel-CCS), AA(Aluminized steel),
SS(Stainless Steel). And with two series of three numbers, they show the diameter range of the specified
Conductor.
Example:
Galvanized steel Dead-end Guy Grip for a cable with a diameter range from 9, 31 to 9, 99 mm
The rods of the fitting are refaced in the ends to avoid damages in the application and to the
Specified cable.
The inside of the dead end is gritted with a non-slip material.
The Aluminium Alloy dead-ends coated have the main function to fix the messenger cable to a pole,
To the structure, front of a house, etc. The area of the loop always must be protected with a suitable
Thimble.
TOLERANCES: LENGTH -10mm-+20mm.
RAW MATERIAL: ALUMINIUM ALLOY
Be used for: Insulated conductor, Telecom cable
