High Temperature
CE
Oil
Standard
Internal Thread
Hydraulic
Alloy
Yes
Yes
by Sea, by Air, DHL, FedEx
New
Standard
Normal Temperature
SUN
Box and Carton Package
China
8413606090
Product Description
SUN CBGA-LHN Hydraulics check valve Counterbalance Valves Cartridges CBGG-LJN RDDA-LCN PRDB-LDN NFDD-LGN
This direct acting, solenoid-operated, 4-way, 3-position spool valve is spring centered to the neutral position. When coil A is
energized, the flow is from port 3 (P) to port 2 (A) and from port 4 (B) to port 1 (T). When coil B is energized, the flow is from
port 3 to port 4 and from port 2 to port 1.
* The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
* This valve is direct actuated and requires no minimum hydraulic pressure for operation.
* In differential flow circuits, the higher return flow should be directed through port 2 (A) to port 1 (T).
* Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids,
greases and lubricants will damage the seals.
* This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat
generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably
water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the
cartridge.
* A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION
section.
* The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt
expended, leading to reliable valve shifting.
* Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
* Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils
and kits are available for more complete environmental protection.
* Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive
installation torque and/or cavity/cartridge machining variations.
energized, the flow is from port 3 (P) to port 2 (A) and from port 4 (B) to port 1 (T). When coil B is energized, the flow is from
port 3 to port 4 and from port 2 to port 1.
* The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
* This valve is direct actuated and requires no minimum hydraulic pressure for operation.
* In differential flow circuits, the higher return flow should be directed through port 2 (A) to port 1 (T).
* Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids,
greases and lubricants will damage the seals.
* This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat
generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably
water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the
cartridge.
* A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION
section.
* The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt
expended, leading to reliable valve shifting.
* Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
* Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils
and kits are available for more complete environmental protection.
* Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive
installation torque and/or cavity/cartridge machining variations.
Clients feedback
