5000x1500x1580 (DXWXH)
Lifetime Warranty
12moths
Fixed
Gas Atomization
Contra-Flow
Convective
Powder, Bulk
Air
Atmospheric Pressure
Continuous
220--660V
ZhiHongDa
Standard Wooden Case
Customer customization
China
8514200090
Product Description
Power Transformer Hot Air Curing Oven
Name: Transformer Curing Oven 550ºC high temperature
Model: 5000×1500×1580 (DXWXH)
Application:
Power Transformer Hot Air Curing Oven are used for curing Transformer. Electric Motor Stator etc products. This kind of oven is generally used for heating and curing heavy workpieces. The load capacity of the flat car is large, and it can reach 25-30 tons. The flat car can be designed based on customers workpieces.
Technical parameters:
Features:
1.This oven used SCR silicon controlled.
The SCR controls heating power output ratio, Save energy and electricity.
2. Time setting device
HS48S-99.99 Timing device, manual/automatic switch, When the temperature reaches the set temperature, the timing will start. When the time reaches the set range, the heating power will be cut off automatically. but the blower motor does not stop rotating to help the cooling inside of the oven.
Products show:
High temperature resistant extension shaft motor:
Our Service
1.More Professional service in hot air curing/drying ovens exporting field
2.Better manufacture ability
3.High quality/Safe material/Competitive price
4.Small order available
5.Quickly response
6.More safe and fast transport
7.OEM design for all customers
Our ovens have been exported to many countries, the quality can be ensured.
We can design ovens of different sizes according to customers' requirements.
Before we quote, please provide the following parameters:
2.What products will be dried or cured
3.What is the max. working temperature
4.What is the weight of your transformer or motor
Looking forward to your inquiry.
Thanks
Name: Transformer Curing Oven 550ºC high temperature
Model: 5000×1500×1580 (DXWXH)
Application:
Power Transformer Hot Air Curing Oven are used for curing Transformer. Electric Motor Stator etc products. This kind of oven is generally used for heating and curing heavy workpieces. The load capacity of the flat car is large, and it can reach 25-30 tons. The flat car can be designed based on customers workpieces.
Technical parameters:
| Product name | Transformer Curing Oven | Model | 5000×1500×1580 |
| Working temperature scope | Room+10~550ºC | Working room size | 5000×1500×1580mm( DxWxH) Note: The height from the flat car surface to the inner top is 1200mm |
| Heating power | 90KW | Temperature control precision | ±1ºC |
| Heating component | stainless steel electric heating tube | Uniform temperature | ±2ºC(no-load) |
| Motor power | 1100W * 6sets | Inner device | Stainless steel flat car with light rail wheels, 1 set, loading capacity up to 10 Ton. |
| Structure | 1.The hot air ovens adopt both sides air duct out of the wind, horizontal cyclic heating. Heating elements are installed in the air ducts of both sides of the oven, motors are installed on the top of the oven, door buckles are fixed by buckle handle. 2.Internal oven with 2 groove channel, .It is very easy to push in or out the trolley. | ||
| Material | Interior material is adopted SUS304 stainless steel plate, Exterior material is made of A3 cold-pressed carbon steel plate with fine powder coating treatment. | ||
Features:
1.This oven used SCR silicon controlled.
The SCR controls heating power output ratio, Save energy and electricity.
2. Time setting device
HS48S-99.99 Timing device, manual/automatic switch, When the temperature reaches the set temperature, the timing will start. When the time reaches the set range, the heating power will be cut off automatically. but the blower motor does not stop rotating to help the cooling inside of the oven.
Products show:
High temperature resistant extension shaft motor:
Our Service1.More Professional service in hot air curing/drying ovens exporting field
2.Better manufacture ability
3.High quality/Safe material/Competitive price
4.Small order available
5.Quickly response
6.More safe and fast transport
7.OEM design for all customers
Our ovens have been exported to many countries, the quality can be ensured.
We can design ovens of different sizes according to customers' requirements.
Before we quote, please provide the following parameters:
- Working room size of the oven (DepthxWidthxHeight)
2.What products will be dried or cured
3.What is the max. working temperature
4.What is the weight of your transformer or motor
Looking forward to your inquiry.
Thanks
