The spunbonded medium filter cartridge exhibits a remarkably high filtration efficiency for fine particles and possesses superior wear resistance and chemical durability. In comparison to paper media, this medium excels in dust cake release performance. The spunbonded medium is particularly well-suited for pharmaceutical manufacturing, powder coating, or fiber materials such as wood or glass fibers.
Technical Specificifications
| Type | FT 600 | FT 900 |
| Dimension(LxWxH): | 320x220x600mm | 320x220x900mm |
| Airflow: | 1000 m3/h | 1500 m3/h |
| Filtration Precision: | 2 μm | |
| Material: | Polyurethane | |
| Antistatic Film Coating: | Yes | |
| Number of Pleats: | 144 pleats | |
Installation Guidelines:
Handle the filter cartridge with care during installation to minimize damage to the filter membrane and deformation of the end caps due to external forces. Remove the old filter cartridge and place it aside. Clean the interior wall of the dust collector. Unpack the new filter cartridge and inspect the surface for stains, check for any damage to the filter material, and ensure the end caps are not deformed. Carefully place the filter carridge into the support cage, align the center hole of the filter core with the screw, ensure the filter cartridge is level, and then tighten the butterfly nut.
