ZQ-B600-6
12 Months
Stretch Blow Molding Machine
PET
Injection Molding
Automatic
Computerized
CE, ISO9001:2008
Engineers Available to Service Machinery Overseas
6 Cavities
600ml
7000-8000bph
Fully-Auotmatic
40 Days
Engineers Available to Service Machinery Overseas
ZQ
General Packing
600ml
Huangyan, China
8477300000
Product Description
Plastic PET bottle blow moulding machine ZQ-B600-6
High Speed: 8000bottles/hour, Max volume: 600ml
ZQ-B600-6 full-automatic pet stretch blow molding machine is the most stable two-step automatic stretch blow moulding machine. It has one to two cavities and the maximum capacity of the products is 0.6L and 1.5L. It can blow bottles in shapes: Carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
Plastic PET bottle blow moulding machine.
Advantages
1). High Automatization
2). High Intelligence: The machine can be controlled through touch screen and running status is shown on it.
3). High Quanlity: Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4). High Speed: 8000BPH(6-cavity)
5). No Contamination: Closed production zone, good self-lubrication system avoid contamination.
6). Low Cost: Low consumption of electricity, air and water.
7). High Transparency: Easy maintenance, absolute safely, visual inspection, low noise.
Plastic PET Bottle Blow Moulding Machine,equipment information.
Note: The specifications are subject to change without notice for the further improvement.
Note: Custom production accepted. Any client idea tried.
High Speed: 8000bottles/hour, Max volume: 600ml
ZQ-B600-6 full-automatic pet stretch blow molding machine is the most stable two-step automatic stretch blow moulding machine. It has one to two cavities and the maximum capacity of the products is 0.6L and 1.5L. It can blow bottles in shapes: Carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
Plastic PET bottle blow moulding machine.
Advantages
1). High Automatization
2). High Intelligence: The machine can be controlled through touch screen and running status is shown on it.
3). High Quanlity: Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4). High Speed: 8000BPH(6-cavity)
5). No Contamination: Closed production zone, good self-lubrication system avoid contamination.
6). Low Cost: Low consumption of electricity, air and water.
7). High Transparency: Easy maintenance, absolute safely, visual inspection, low noise.
Plastic PET Bottle Blow Moulding Machine,equipment information.
| TYPE | ITEM | ZQ-B600-4 | ZQ-B600-6 | ZQ-B600-8 |
| CONTAINER | Number of cavity | 4 cavities | 6 cavities | 8 cavities |
| Output | 5500-6000 pcs/hr | 7000-8000 pcs/hr | 9000-11000 pcs/hr | |
| Max.container volume | 0.6L | 0.6L | 0.6L | |
| Max.neck diameter | 38mm | 28-30mm | 28-30mm | |
| Max.container diameter | 65mm | 60mm | 60mm | |
| Max.container height | 230mm | 260mm | 260mm | |
| ELECTRICAL SYSTEM | Number of lamp | 35pcs | 56pcs | 48pcs |
| Max.heating power | 32kw | 34kw | 48kw | |
| Installation power | 32kw | 48kw | 56kw | |
| Actual power consumption | 22kw | 24kw | 45kw | |
| AIR SYSTEM | Operatating pressure | 7-9kg/cm² | 7-8kg/cm² | 7-8kg/cm² |
| Low pressure consuming | 1600Ltr/min | 1600Ltr/min | 2000Ltr/min | |
| Blowing pressure | 25-35kg/cm² | 25-35kg/cm² | 25-35kg/cm² | |
| High pressure consuming | 2200-2500 Ltr/min | 2000-2200 Ltr/min | 2300-2500 Ltr/min | |
| CHILLER WATER | Operating pressure | 5-6 kg/cm² | 5-6 kg/cm² | 5-6 kg/cm² |
| Temperatuer | 10ºC | 10ºC | 10°C | |
| Consuming | 5600kcal/hr | 8000kcal/hr | 8000kcal/hr | |
| Flow rater | 30Ltr/min | 88Ltr/min | 200Ltr/min | |
| MACHINE | Machine dimension | 3.7x1.95x2.1(m) | 5.0x2.1x2.1(m) | 6.9x2.2x2.1(m) |
| Machine weight | 3.7ton | 5.0ton | 6.5ton |
Note: Custom production accepted. Any client idea tried.
