DRR
14-18 Hours
Natural Gas
1%
340PA
Riello From Italy
HEXIANG
Container by Sea Transport
20-250 square meter
China
84193910
Product Description
Ceramic green base and plaster mould fast drying chamber is used to fast dry green base and plaster mold, to improve casting pass rate and capacity.
Frame and wall
The frame is made by various excellent steel material, the wall body and roof are made of polyurethane foam board or rock wool insulation board.
Supply heat system
It is consist of natural gas burners, electric air-regulating doors, heat-resistant induced draft fans and indoor hot air supply pipes, etc., and can also use kiln waste heat.
Hot air cycle system
It is composed of main heating fan, circulating fan, hot air pipe, cyclone fan tube and its power part.
Discharging system
It includes moisture exhaust pipes, electric valves and axial fans etc.
Electric system
It includes power distribution cabinets, temperature and humidity sensors and their wiring systems, using electrical controls from internationally renowned brands such as Mitsubishi and Schneider to ensure stable operation of the equipment.
According to dry principle, the dry process includes the following 4 steps:
Drying speed increased stage(O-A)
Isokinetic drying stage(A-B)
Drying speed reducing stage(B-C)
Balance stage(C-D)
| Dryer chamber Main technical data | ||
| Dryer room area | 20-250m2 | |
| Door size: W x H | 2x2.4m | |
| Door type: | hinged door for heat preservation or lifting door | |
| Temperature in room | Max 85 degree | |
| Dryer time | 14-18 hours | |
| Burner brand | Riello from Italy | |
| Fuel | Natural gas | |
| Calorific value | 8600kcal/Nm3 | |
| Maximum output power | 440000Kcal/h | |
| Model and specification of heat resistant main fan | type: TCX710-I | power: 4Kw |
| Blast capacity | 18000m3/h | |
| Full pressure: | 580Pa | |
| Circulating fan model and specification: | type: TCX710 | power: 5.5Kw |
| Air volume: | 28000m3/h | |
| Full pressure: | 340Pa | |
| Water contents after dryer: | 1% | |
| Spare parts name | Brand |
| Main fan of heating | Tangren fan |
| Discharging humidity fan | Tangren fan |
| Power of rotary air divider | Worm speed reducer |
| Electric control system | Schneider, Mitsubishi, Omron |
| Electric actuator | BELIMO GMU24-SR |
| Humidity sensor | HC2-S-DP |
| Temperature sensor | PT100 |
Supply sanitary ware slip and glaze formula service;
Supply sanitary ware high pressure casting technical train service;
Supply sanitary ware high pressure mold making and train service;
Supply high quality producing machine;
Supply installation and commissioning service;
Supply producing team building service.
