alloy 8011/8021 H18
Pharmaceutical
Roll
Hard
Coated
Thick Foil
Double light Aluminum Foil
Rolling
Pulp
8011 Hard
Food Packaging
Bright
Food Take
JUN AO
Polywood Case
thickness 20mic 25mic
China
76071190
Product Description
Qingdao Jun Ao Aluminum Co.,Ltd
We are the special manufacturer of aluminum foil ,Pharmaceutical grade Aluminum foil is our key products .
Pls check below details information :
Qingdao Jun Ao Aluminum Co.,Ltd
We are the special manufacturer of aluminum foil ,Pharmaceutical grade Aluminum foil is our key products .
Pls check below details information :
Technical date sheet
Aluminum and aluminum alloys foil for Cold forming
Chemical composition
Alloy Temper Specification
2. Thickness
3. Width
4. Core O.D.
5. Mechanical property
6.Heat sealing strength
7. Pinholes
8. Joint
9. Core I.D.
This standard is based on GBT 22645-2008/China national standard
We are the special manufacturer of aluminum foil ,Pharmaceutical grade Aluminum foil is our key products .
Pls check below details information :
Qingdao Jun Ao Aluminum Co.,Ltd
We are the special manufacturer of aluminum foil ,Pharmaceutical grade Aluminum foil is our key products .
Pls check below details information :
Technical date sheet
Aluminum and aluminum alloys foil for Cold forming
Chemical composition
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Rest | |
| Single | Total | |||||||||
| 8011/8021 | 0.50-0.9 | 0.6-1.0 | 0.10 | 0.20 | 0.05 | 0.05 | 0.10 | 0.08 | 0.05 | 0.15 |
Alloy Temper Specification
| Alloy | Temper | Specification | |||
| Thickness /mm | Width /mm | I.D./mm | O.D./mm | ||
| 8011/8021 | O | 0.03-0.045 | 250-1000 | 76.2 | 300-580 |
| 152.4 | 450-750 | ||||
2. Thickness
| Thickness/mm | Tolerance | |
| 0.03-0.045 | High precision level | Ordinary level |
| ±4 | ±6 | |
3. Width
| Width/mm | Tolerance |
| ≤800 | ±1 |
| >800 | ±1.5 |
4. Core O.D.
| O.D./mm | Tolerance |
| 300-750 | ±20 |
5. Mechanical property
| Alloy | Temper | Thickness /mm | Tensile test results | |
| T.S. Rm/N/m | Elongation A100mm/% | |||
| 8011/8021 | O | |||
| >0.02-0.045 | 60-110 | 4 | ||
6.Heat sealing strength
| Composite material | |
| PVC | |
7. Pinholes
| Thickness/mm | Pinholes/ | Pore diameter(mm) |
| 0.03-0.045 | 0 | - |
8. Joint
| O.D./mm | Each volume allowed number of joint | Joint spacing/m | |
| Thickness:<=0.05mm | Thickness:>0.05mm | ||
| <=500 | <=1 | 0 | >1000 |
| >500 | <=2 | ||
9. Core I.D.
| I.D./mm | I.D. tolerance | Length tolerance |
| 76.2 | ±0.5 | ±4.0 |
| 152.4 | ±1.0 |
This standard is based on GBT 22645-2008/China national standard
