Self-priming jet water pumps with a very high hydraulic
performance and a considerable pressure capacity.
Motor
*Two-pole induction motor(n=2850r.p.m)
*Insulation Class B
*Protection IP44
Material
*Pump body: Cast iron
*Motor support: Cast iron
*Motor housing: Aluminum
*Impeller: Brass
*Diffuser: Noryl
*Single with rotor:45#Steel, AISI 416 stainless steel if request
*Mechanical seal: Carbon/Ceramic
Single phase 220V-240V/50H
Single phase 110V-127V/60Hz If request
Single/three phase 220V/60Hz If request
NO. | TYPE | POWER | MAX.FLOW | MAX.HEAD | INLET/OUTLET | MAX.SUCT | N.W | PACKING DIMENSION | |
(Kw) | (Hp) | (L/min) | (m) | (Inch) | (m) | (K.g) | (mm) | ||
A | JSP-45 | 0.25 | 0.34 | 45 | 32 | 1"*1" | 9 | 11 | 395*185*200 |
B | JSP-60 | 0.37 | 0.5 | 40 | 35 | 1"*1" | 9 | 14 | 445*210*225 |
C | JSP-80 | 0.55 | 0.75 | 50 | 40 | 1"*1" | 9 | 15 | 445*210*225 |
D | JSP-100 | 0.75 | 1 | 60 | 45 | 1"*1" | 9 | 16 | 445*210*225 |







FAQ
Q1: Are you a factory or just a trading company?
A1: Manufacturer,and we focus on the development and production of water pump for more than 20 years.
Q2: Is customized service available?
A2: Of course, OEM & ODM both are available.
Q3: How can I get the quotation?
A3: Leave us message with your purchase requirements and we will reply you within one hour on working time. And you may contact us directly by Trade Manager.
Q4:Can I buy one as sample?
A4: Yes, of course.
Q5: How about your quality control?
A5: Our professional QC will check the quality during the production and do the quality test before shipment.