Cat 6 lan cable UTP 23AWG BC 0.57mm PVC Jacket Fluke test
Cat 6 lan cable UTP 23AWG BC 0.57mm PVC Jacket Fluke test
Standards:
ANSI/TIA-568-C.2 IEC 61156-5
EN 50288-6-1
EN 50173
ISO/IEC 11801
EN 50575
Application:
10BASE-T (IEEE 802.3)
4/16 Mbps TOKEN RING (IEEE 802.5)
100BASE-VG-AnyLAN
100 Mbps TP-PMD (ANSI X3T9.5)
100BASE-T (IEEE 802.3)
55/155 Mbps ATM
1000BASE-T (Gigabit Ethernet)
Color Codes:
Insulation Color:
P1: White & Blue / Blue
P2: White & Orange / Orange
P3: White & Green / Green
P4: White & Brown / Brown
Jacket Color: Optional
Packing:
1. Easy Pull Box/ 305m
2. Reel/ 305m
3. Reel/ 500m
Test Requirements:
Pass fluke 90m permanent link testTIA-568-C.2
Cable Parameters:
Conductor Material 99.99% Solid Bare Copper
Conductor Number 8C(4 pairs)
Cable AWG 23
Construction(±0.01mm) 1/0.57
Separator PE Cross
Rip Cord Yes
Insulation Material PE
Nom. Thickness(mm) 0.22
Diameter(±0.08mm) 1.03
Jacket Material PVC
Nom. Thickness(mm) 0.50
Diameter(±0.30mm) 6.30
Electrical Performance
Max. Conductor DC Resistance (Ω/km) 93
Min. Insulation Resistance (ΩM-KM) 500
Dielectric Strength DC-1KV/1 Min
1.0-250MHZ Characteristic Impedance(ohms) 100Ω±15Ω
1.0-250MHZ Delay Skew(ns/100m) ≤45
Pair to Ground Capacitance
Unbalance(Pf/100m) ≤330
Resistance Unbalance(%) ≤4
Max Mutual Capacitance 5.6nF/10
Max DC Loop Resistance 19.2Ω/100m
Before Aging Tensile Strength(Mpa) ≥13.5
Elongation(%) ≥100
After Aging
100ºC*24h*7d Tensile Strength(Mpa) ≥75
Elongation(%) ≥50
Velocity of Propagation NVP 69%
