SJ50
One Year
One Year
Filament Machine
ABS
Filament Machine
One Feed
Integral Type Extruder
Single-Screw
Full Intermeshing
Deep Screw
Don't Exhaust
Automatic
Computerized
Film
SJ25
China
8477209000
Product Description
1.The gears and bearings(NSK, Japan) are precision ground and hardened to ensure smooth and quiet operations.
2.The screw and barrel is manufactured from Aluminum Chromolybdenum alloy steel and is stress relieved.
3.The die undergoes nitride hardening treatment for a long service time.
4.The water tank and the surface of cutting machine are made of 304 stainless steel.
5.The main extruder's screw designed to suit plastic material specified. Tube die head assembly manufactured in tool steel.
6. all of our machines are made according to CE standard.
2.The screw and barrel is manufactured from Aluminum Chromolybdenum alloy steel and is stress relieved.
3.The die undergoes nitride hardening treatment for a long service time.
4.The water tank and the surface of cutting machine are made of 304 stainless steel.
5.The main extruder's screw designed to suit plastic material specified. Tube die head assembly manufactured in tool steel.
6. all of our machines are made according to CE standard.
Plastic PLA drinking Straw extrusion machine | ||||
Name | SJ50 Straw extrusion machine | |||
Model | SJ50 | SJ50/25 | SJ50/25/25 | |
Description | 1. Main parts are: extruder, cooling water tank, vacuum shaping equipment, air compressor, hauling cutting system, sing | |||
2. Main screw diameter: 50mm, important parts such as screw and cylinder adopts superior alloy steel with nitrogen | ||||
3. Aspect ratio: 28:1 | ||||
4. Diameter of sub-screw:25mm, Aspect ratio: 20:1 | ||||
5. Extruding power: 11kw (frequency conversion control) | ||||
6. The die undergoes nitride hardening treatment for a long service time | ||||
7. The water tank and the surface of cutting machine are made of 304 stainless steel | ||||
8. The main extruder's screw designed to suit plastic material specified. Tube dies head assembly manufactured in tool steel. | ||||
Power Supply | Main screw | 380v ,3phase,50hz,7.5kw(VFD) | ||
Sub-screw | / | 0.75kw | 0.75×2kw | |
Heating | 7kw | 9.56kw | 12kw | |
Hauling motor | 0.75kw(VFD) | |||
Cutting motor | 0.75kw(VFD) | |||
Total power | 16.5kw | 20kw | 22.5kw | |
Way of Hauling | By rubber roller | |||
Way of cutting | Rotatory cutting length range 50-300mm | |||
Cooling water tank | Usually 4.4m, can be adjusted up&down, right &left, forward&backward. Made of superior stainless teel | |||
Straws Sepc | Material | PLA PP PE etc | ||
Straw Diameter | 2mm~13mm can be custiomized for special requirement | |||
Straw Length | Customizable | |||
Speed | 600~1000pcs/min (product rate : 20kg/h-30kg/h | |||
Color | Single | Two colors | Three colors | |
Straight or spiral | ||||
Cutting End | 90°/90°,90°/45°,90°/60°,45°/45°,60°/60 | |||
