PTFE is a synthetic fluoropolymer that offers a number of unique properties, from low coefficient of friction, to unmatched chemical resistance, and a wide operating temperature range
• Excellent corrosion resistance
• Good electrical insulation performance
• High temperature resistance
• Low coefficient of friction
• Good non-sticky properties
PTFE semi-finished rod,tube and sheet is widely used in chemical anti-corrosion,mechanical seal,engineering piping,electrical insulation,pump&valve fluid,aviation,textile,ceramic and other industries.
Standard semi-finished stock teflon shapes includes:
• Molded,extruded and skived sheets
• Extruded rods and tubes
• Molded rods and tubes
Materials
• Virgin,Modified PTFE
• Filled PTFE/Reinforced PTFE
Technical Data for Teflon rod
| Property | Norm | Value |
| Density(g/cm³) | ISO1183 | 1.8~2.5 |
| Tensile Strength at Break(Mpa) | ISO527 | 18~30 |
| Modulus of Elasticity(Gpa) | ISO527 | 0.35~0.5 |
| Elongation at break(%) | ISO527 | 150~350 |
| Hardness Shore(Shore D) | Durometer | 50~65 |
| Temperature Range(°C) | / | -196~260 |
| Coefficient of Linear Thermal Expansion(10-4/°C) | ISO11359 | 1.0 |
Finished PTFE/Teflon Products
Whether you require a PTFE/Teflon seal profile or complex 5-axis CNC bespoke components, we have the capability to manufacture PTFE parts and components to your requirements. Our highly trained workforce, combined with investment in the latest CNC machining technologies, helps ensure consistent high quality.
Machined PTFE parts to your specification -we manufacture according to drawing, from O-ring to piston ring, from seal to bearing, from bush to back-up ring and thousands of complex, bespoke components required by our customers. We also offer help with design optimisation for manufacture.
Below are some examples of machined parts by PTFE/Teflon rod or tube.
Production ability:
