DF-203
Qfreon
Qfreon
Qfreon
Element Organic Polymer
White
Synthetic Resin and Plastics
PTFE Sheet
by Moulding Pressure
99.9%
PTFE Gasket, Rod, Tube, Sheet, Bearings
100
QFREON OR OEM
20kg
20kg
Shandong, China
Product Description
ltem | unit | DF-203F |
Appearance | / | scrap metal, sand and other impurities cannot be mixed, with visible dark spots cannot exceed 2% |
Bulk Density,g/l | / | 475±100 |
Tensile strength,≥ | Mpa | 24 |
Elongation at break,≥ | % | 300 |
Relative density | / | 2.150-2.200 |
Moisture Content,%≤ | % | 0.030 |
Average Particle SIze | / | 400-575 |
Maximum compression ratio | / | 4001 |
Hot stress crack resistance | / | - - |
Polytetrafluoroethylene (PTFE), commonly known as "the king of plastics", is a polymer compound formed by the polymerization of PTFE. Insulation and good resistance to aging. Used as engineering plastics, can be made into PTFE tube, rod, tape, plate, film, etc. Generally used in corrosion-resistant pipes, containers, pumps, valves, radars, high-frequency communication equipment, and radio equipment with high performance requirements. Processing method Molding Main Application The resin are mainly used as insulating film for electric, the products of thin wall, seal, gasket, club, panel, tube, axletree, seal ring, and loop etc Package, transportation and storage 1). PTFE is packed in double layer PVC bags inside and in hard circular barrels outside.20kg/barrel. On the barrel, there should be attached label and quality certificate. 2). PTFE should be stored in clean dry warehouse to prevent from dust, moisture, etc, foreign maters. 3). The product are transported according to non-dangerousproducts. Heat, moisture, freezing and strong shock should be avoided during transportation. Over-bumpiness and compression is adapt to make the resin bind together.
