120KN
DIN, ANSI, GB
Medium Carbon Steel
IEC120
Galvanized Sheet
Round
Finishing: Hot DIP Galvanization
Transmission Line Fitting
CIE
Pallet or as Client Request
IEC
China
73269090
Product Description
Overhead Transmission pole line hardware fitting socket-Ball is our normal products. the material of Transmission pole line hardware fitting is Forged steel, Transmission pole line hardware have exported to Russia, UK, Italy, Morocco, India, Spain, USA, and etc.
We can produce Transmission pole line hardware fitting according to your drawing .
Welcome your enquiry.
All our line hardware are made strictly test before deliery ,which will assure us to offer good quality to client. Our test equipment :
Most of our line hardware and line fittting are made in forgred-steel. our forging equipment is as following:
We can produce Transmission pole line hardware fitting according to your drawing .
Welcome your enquiry.
| REF No. | Minimum Failing Load | Socket Designation | A mm | B mm | C mm | RDmax mm | E mm | F mm | RGmin mm |
| 15/84A | 70KN | 16B | 59 | --- | 18.5 | 23 | 18 | 8 | 38 |
| 28/37A | 125KN | 20 | 76 | 41 | 18.5 | 32 | 22 | 9.5 | -- |
| 42/37A | 190KN | 24 | 76 | 41 | 21.5 | 35 | 24 | 13 | -- |
| 42/46A | 190KN | 24 | 121 | -- | 28.5 | 35 | 24 | 13 | 45 |
| 42/104A | 190KN | 24 | 105 | -- | 28.5 | 46 | 32 | 22 | 64 |
| 84/37A | 400KN | 28B | 105 | -- | 28.5 | 46 | 32 | 22 | 64 |
All our line hardware are made strictly test before deliery ,which will assure us to offer good quality to client. Our test equipment :
Most of our line hardware and line fittting are made in forgred-steel. our forging equipment is as following:
