A Type Insulator
Low-voltage, Insulators
Nylon
Bushing Insulator
B Type Insulator
Insulation, Electrical Installation
Trough Type
210KN
ISO9001
Black
Rib
30 Days
Sea
1 Year
Charge
Support
C11000
100% (20 Celsius, Iacs)
RIB or OEM
Carton/Wooden
Epoxy resin
Jiangsu
85049010
Product Description
Tri-clamp Molded Bushings
We offer both high voltage and low voltage bushings designed for use in pad or surface mounted transformers. The bushings insulate the current carrying conductor from the tank allowing for termination of both the airside conductor and the transformer leads. Both the high and low voltage bushings conform to ANSI/IEEE standards.
1" and 5/8" low voltage bushings are molded from a glass-reinforced, high temperature nylon resin. The inch and a quarter low voltage bushing is molded from a polyester resin. All of the low voltage bushings provide a spade terminal for internal connection and a threaded stud for external connection.
We offer both high voltage and low voltage bushings designed for use in pad or surface mounted transformers. The bushings insulate the current carrying conductor from the tank allowing for termination of both the airside conductor and the transformer leads. Both the high and low voltage bushings conform to ANSI/IEEE standards.
1" and 5/8" low voltage bushings are molded from a glass-reinforced, high temperature nylon resin. The inch and a quarter low voltage bushing is molded from a polyester resin. All of the low voltage bushings provide a spade terminal for internal connection and a threaded stud for external connection.
Erminal spades are made by die forging and all the external thread is made by mechanical rolling to get higher mechanical stress.
Electrical Data
| Current Rating | Voltage Rating | 60Hz 1min withstandrms voltage(kV) | BIL Rating | Conductor Diameter | |
| Part Code | (A) | (volts) | (kV) | (inches) | |
| NJREC-600G01 | 600 | 1.2 | 11 | 30 | 5/8" |
| NJREC-1200G01 | 1200 | 1.2 | 11 | 30 | 1.0" |
