S-350-12
Single
>2 Years
301 - 400W
110-220V
Series Switching Power Supply
Self-excited Switching Power Supply
Width Modulation Type
Terminal Power Distribution Equipment
One-way Transmission
PWM
CE, RoHS, FCC, Bis
Waw
waw
Carton
215*115*30mm
China
8504401400
Product Description
OEM 5V 12V 24V 36V 48V Switching Power Supply 1A 2A 5A 10A 20A 30A For Led Strip Light
Features
1.High Efficiency and good price
2.Built-in EMI filter
3.100% full load burn-in test
4.Low output ripple and noise
5.Protection:Over load/Over voltage/Short circuit
6.LIFETIME WARRANTY
| Model Specification | S-350-5 | S-350-7.5 | S-350-12 | S-350-15 | S-350-24 | S-350-27 | S-350-48 |
| DC output voltage | 5V | 7.5V | 12V | 15V | 24V | 27V | 48V |
| Output voltage error | ±2% | ±2% | ±1% | ±1% | ±1% | ±1% | ±1% |
| Rated output current | 50A | 40A | 29A | 23.2A | 14.6A | 13A | 7.3A |
| Output current range | 0-50A | 0-40A | 0-29A | 0-23.2A | 0-14.6A | 0-13A | 0-7.3A |
| Wave and noise | 50mVp-p | 150mVp-p | 150mV | 150mV | 150mV | 200mV | 240mV |
| Inlet stability | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
| Load stability | ±1% | ±1% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
| DC output power | 250W | 300W | 348W | 348W | 350.4W | 351W | 350.4W |
| Efficiency | 78% | 79% | 83% | 83% | 84% | 85% | 86% |
| Adjustable range for DC voltage | 4.5-5.6V | 6-9V | 10-13.2V | 13.5-18V | 20-26.4V | 26-32V | 41-56V |
| AC input voltage range | 90~132VAC/180~264VAC BY SWITCH 47~63Hz;248~370VDC | ||||||
| Input current | 6.5A/115V 4A/230V | ||||||
| AC impulse current | 25A/115V 50A/230V | ||||||
| Leakage current | <3.5mA/240VAC | ||||||
| Overload protection | 105%~135%. Type,PULSING HICCUP SHUTDOWN; Reset,auto recovery | ||||||
| Over-voltage protection | 5.75-6.75V | 9.4-10.9V | 13.8-16.2V | 18-21V | 27.6-32V | 33.7-39V | 57.6-67.2V |
| High-temperature protection | RTH3>=65°C FAN ON<=55°C FAN OFF>=80°CCut off output(5~15V) | ||||||
| RTH3>=70°C FAN ON<=60°C FAN OFF>=85°CCut off output(24~48V) | |||||||
| Temperature coefficient | ±0.03%°C(0~50°C) | ||||||
| Setup rise hold up time | 200ms,50ms,20ms | ||||||
| Vibration | 10~500Hz,2G 10min./1cycle,Period for 60min,EACH AXES | ||||||
| Withstand voltage | Input and output interval,1.5KVAC,Input and enclosure,1.5KVAC,Output and enclosure,0.5KVAC | ||||||
| Isolation resistance | Input and output interval,Input and enclosure,Output and enclosure,500VAC/100M Ohms | ||||||
| Working temperature and humidity | -10°C~+50°C,20~90%RH | ||||||
| Store temperature and humidity | -20°C~+85°C,10~95%RH | ||||||
| Overall dimension | 215*115*50mm | ||||||
| Weight | 0.95Kgs /17pcs per carton | ||||||
| Safety standards | Design refer to UL1012, EN60950-1,EN61347-1,EN-61347-2 approved | ||||||
| EMC standards | EN55015,EN55022,EN55024,EN61000-2,EN61000-3,EN61547 approved | ||||||
| Note,1.The testing condition for the parameter above is,230VAC input, rated load,25°C 70%Rh,Humidity | |||||||
| 2.Error,include the setting error, line stability and load stability.(Note,5) | |||||||
| 3.Wave test,adopting"A12"double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting | |||||||
| 4.Inlet voltage stability test, when is over load, the lowest voltage of inlet is representative to the highest voltage. | |||||||
| 5.Load stability test: The load is from 0% to 100%,others 60%. | |||||||
| 6.C2,3,11must be knocked down. | |||||||
