TPE01
Thermoplastic Rubber
Specialty Plastics, Thermoplastic Elastomer
Thermoplastic Plastics
Injection
Black
Shore a 60
0.89g/cm3
Juli
Woven Bag
25kg/bag
China
4002991100
Product Description
Description :
TPE compound granules pellets for tyre
TPE with general plastic processing performance is one of the effective ways, and have similar cross linked rubber elastic polymer material.It is completely non-toxic, environmental protection, good stability, texture soft, beautiful appearance, feel is good, easy dyeing.
Processing Technology:
TPE can be processed by injection, blowing and extrusion.
Product Features:
1.Excellent product attributes:
(1) Good elasticity and compression deformation resistance.
(2) Excellent UV resistant and weather-resistance.
(3) Acid and alkali resistance.
(4) Oil and solvent resistance.
(5) Wear resistance.
(6) Excellent tear strength.
2.Wide range of temperature for application (-60---150), wide range of hardness(shore 45A----shore 54D), easy dyeing, greatly improve the freedom product design.
3.Excellent processing performance:suitable for injection, extrusion, blow molding and other thermoplastic processing methods, efficient, simple, no need to add equipment , adjustable liquidity, low shrinkage.
4.Green environmental protection ,recyclable use, repeated use of six times no significant decline in performance, in line with EU environmental requirements.
5.Sub--gloss and homogeneous appearance, high surface quality, smooth and soft to touch, non-sticky.
TPE compound granules pellets for tyre
TPE with general plastic processing performance is one of the effective ways, and have similar cross linked rubber elastic polymer material.It is completely non-toxic, environmental protection, good stability, texture soft, beautiful appearance, feel is good, easy dyeing.
Processing Technology:
TPE can be processed by injection, blowing and extrusion.
Product Features:
1.Excellent product attributes:
(1) Good elasticity and compression deformation resistance.
(2) Excellent UV resistant and weather-resistance.
(3) Acid and alkali resistance.
(4) Oil and solvent resistance.
(5) Wear resistance.
(6) Excellent tear strength.
2.Wide range of temperature for application (-60---150), wide range of hardness(shore 45A----shore 54D), easy dyeing, greatly improve the freedom product design.
3.Excellent processing performance:suitable for injection, extrusion, blow molding and other thermoplastic processing methods, efficient, simple, no need to add equipment , adjustable liquidity, low shrinkage.
4.Green environmental protection ,recyclable use, repeated use of six times no significant decline in performance, in line with EU environmental requirements.
5.Sub--gloss and homogeneous appearance, high surface quality, smooth and soft to touch, non-sticky.
| Performance project | Test method | Unit | Data |
| Hardness | ASTM D2240 | Shore A | 0 Shore A-90 ShoreA |
| Density | ASTM D792 | g/cm cube | 0.89-1.15 |
| Tensile strength | ASTM D412 | MPa | 25 |
| Elongation | ASTM D412 | % | 530 |
| Tear strength | ASTM D624 | KN/m | 18 |
| Shrinkage rate | ASTM D955 | % | 1.5 |
| Brittle temperature | ASTM D746 | ºC | <-50 |
| Compressive deformation | ASTM D395B | % | 15 |
