DPT-5
Standard
Diagnostic Reagents, Paints
Industry
Yellow, Red, Blue
Liquid
Synthetic
Insolubility
Matel
NDT Check
Spray
sx
Carton
Iso9001: 2000
China
37079090
Product Description
dye penetrant inspection
DPT-5 NDT Dye Penetrant Inspection Materials
Quick drying, quick indication
High sensibility
Non-poison, harmless
Solvent remove
Features:
L Quick drying, quick indication.
L Solvent removable, or water removing first and solvent removing afterward.
L Low content of fluorine, chloride and sulfur. Suitable for surface flaw detection of austenitic stainless steel.
L High sensibility.
L Non-poison, harmless, without strong stimulation order organic solvent
L Imported COSTER valve and nozzle. The luster well-distributed and covered widely on work piece. The nozzle of P, R. D can be changed to each other.
Application:
It can be widely used in chemical industry, shipping industry, power industry, aviation industry, engineering, metallurgical industry, engineering, metallurgical industry, automobile, petrol industry, railway, etc.
Packing:
L Aerosol can(500ml): 6can/set
L 18L liter can(bulk packing)
Usuage:
Clean the workpiece surface with Remover.
Spray Penetrant on the workpiece surface and keep wet of 5-10 minutes.
Clean Penetrant on the workpiece surface with Remover.
Shake Developer until well-distributed, then spray it from 150~300mm.
Flaws will be revealed.
Remove developer with Remover.
DPT-5 NDT Dye Penetrant Inspection Materials
Quick drying, quick indication
High sensibility
Non-poison, harmless
Solvent remove
Features:
L Quick drying, quick indication.
L Solvent removable, or water removing first and solvent removing afterward.
L Low content of fluorine, chloride and sulfur. Suitable for surface flaw detection of austenitic stainless steel.
L High sensibility.
L Non-poison, harmless, without strong stimulation order organic solvent
L Imported COSTER valve and nozzle. The luster well-distributed and covered widely on work piece. The nozzle of P, R. D can be changed to each other.
Application:
It can be widely used in chemical industry, shipping industry, power industry, aviation industry, engineering, metallurgical industry, engineering, metallurgical industry, automobile, petrol industry, railway, etc.
Packing:
L Aerosol can(500ml): 6can/set
L 18L liter can(bulk packing)
Usuage:
Clean the workpiece surface with Remover.
Spray Penetrant on the workpiece surface and keep wet of 5-10 minutes.
Clean Penetrant on the workpiece surface with Remover.
Shake Developer until well-distributed, then spray it from 150~300mm.
Flaws will be revealed.
Remove developer with Remover.
| Penetrant | Remover | Developer | |
| Appearance | Dark-red liquid | Colorless transparent liquid | White suspension |
| Specific graviy | 0.88±0.01 | 0.69±0.01 | 0.81±0.01 |
| Corrosive Properties(g/ml) | No evidence of corrosion | ||
| Flash pint / '' C | 25 | -6 | -6 |
| Washabilty | Easy to wash | ||
| Sensitivity | ≥level 1 | To be used with DPT-5 penetrant | |
| Stability | Qualified | ||
| Viscosity/mm 2 /s | 3.8±0.3 | 1.51 | 1.03 |
| Re-dispersing property | - | - | Easy to disperse |
