This series Multi-station Copper Bus Bar Processing Machine For Switchboard has three units: punching, shearing and bending. It is used to process copper and aluminum busbars in different specification.
Processing material:
Brass/Copper and Alumimum Busbar.
Functions:
1. Bending at vertical and horizontal direction.
2. Punching for round and oblong hole.
3. Cutting busbar.
4. Special for embossing, knurling, twisting, cable joints pressing.
1. The cut surface is smooth and neat, no droop, no burrs, no waste
2. Rotary turret punch unit installed 6 dies, less replacing, high efficiency
3. Three work positions can be used at the same time
4. Manual button and foot switch are optional
5. Adjustable working stroke
6. On users requirement, special mold for special shape
| Function | Model | JPSK-303CM | JPSK-303DM |
| Punching | Max. punching force (Kn) | 300 | 300 |
| Max. punching diameter range (mm) | 4.3-25 | 4.3-25 | |
| Max. thickness (mm) | 12 | 12 | |
| Max. width (mm) | 160 | 160 | |
| Cutting | Max. cutting thickness (mm) | 12 | 12 |
| Max. width (mm) | 160 | 160 | |
| Horizontal bending | Max. bending force (Kn) | 300 | 300 |
| Max. thickness (mm) | 12 | 12 | |
| Max. width (mm) | 160 | 160 | |
| Vertical bending | Max. thickness (mm) | 10 | 10 |
| Max. width (mm) | 100 | 100 | |
| Min angle (degree) | 90° | 90° | |
| Power | kw | 1×4kw | 3×4kw |
| Out dimension | mm | 1720×1220×1220 | 1720×1220×1220 |
| Weight | kg | 1220 | 1320 |
