Metal Straightening Machine Metallic Processing Machinery
Series JY straightening machine, this machine is mainly used for precision straightening and roll calendering for the bar after peeled or grinded and rough pre-straightening for the black bar.
Due to straightening and roll calendering can be completed at the same time, so that the working efficiency is high.
Principle of Operation
The machine adopts special curve between upper and lower concave and convex two straightening rolls to realize straightening and roll calendering at the same ti
Technical Parameters
weight bearing | ≤5000Kg | |
| before straightening required | Diameter range | Φ20-Φ100 |
| Yield strength | 1000N/mm2 | |
| Surface hardness | HB320 | |
| Original curvature | ≤2‰ | |
| Length range | 2M-6M(lengthened as required) | |
| after straightening | diameter range | Φ20-Φ100 |
| diameter tolerance | ≤h9 | |
| surface roughness | ≤0.4μm | |
| straightness | ≤0.20mm/M | |
| main technical parameter | No. Of roller | 2 |
| Diameter of roller | Φ360mm | |
| Straightening speed | 0-30m/min | |
| Spinning speed of roller(stepless ) | 0-50circles/min | |
| main driving motor power(AC) | 2 set of motor of 45kW | |
| Adjustable motor power | 1 set of motor of 3kw | |
| energy medium parameter | Voltage | 3X380V±10% |
| Frequency | 50HZ±2% | |
| Capacity | 100KW | |
| Air flow rate | 0.5m3/min | |
| Coolant flow rate | 10M3/h | |
| Gas consumption | 20M3/h | |
| equipment constitute | Loading rack | 1 set |
| Feeding roller | 1 set | |
| Main engine | 1 set | |
| Extracting device | 1 set | |
| Unloading roller | 1 set | |
| Unloading rack | 1 set | |
| Electric system | 1 set | |
| Coolant and lubricating system | 1 set | |
Our Services
1. Free quality guarantee period for 12 months, except for wearing parts.
2. Free provide long-term technical support
3. Free train buyer's operator in seller's factory
4. Fast response service within 24 hours
5.Our engineers can offer overseas service, including guiding installation, commissioning, training, etc, if our customer needs.
