10*2*14000mm
Customized
Metallurgy
ISO
Steel
High Temperature
10-60mm
1-14m
5-10bar
1-5mm
SINCERCARBON
Bundle
China
73063019
Product Description
Oxygen Lance Pipe are small diameter pipes used with oxygen is an invaluable tool for the primary metals industry. It is used daily in almost all ferrous and non-ferrous primary production facilities. This small diameter pipe serves below purposes for these industries:
Oxygen lance tube for decarburize:
Carbon and other chemical constituents impart certain attributes or properties to a metal and these elements must therefore be carefully measured and controlled during the smelting process. Empl0yed in blast furnaces basic oxygen furnaces as well as induction and electric arc furnaces oxygen lance tube is used for decarburize i.e., a process of pumping an oxygen rich mixture at high pressure through oxygen lance tube into the melt. The
oxidizing effect burns off the excess carbon in the molten metal thus reducing the percentage of carbon to an acceptable level.
Oxygen lance tube are used for opening furnace tap holes:
When the desired steel composition and temperature has been reached the furnace tap hole is opened through a combination of drilling and tapping using oxygen lances. Lances are coupled to a high-pressure oxygen supply the end of the lance is ignited and through careful and skillful manipulation the tap hole clay which can be up to
800mm thick is effectively burnt away, facilitating the pouring of the molten metal for further processing.
Oxygen lance tube for decarburize:
Carbon and other chemical constituents impart certain attributes or properties to a metal and these elements must therefore be carefully measured and controlled during the smelting process. Empl0yed in blast furnaces basic oxygen furnaces as well as induction and electric arc furnaces oxygen lance tube is used for decarburize i.e., a process of pumping an oxygen rich mixture at high pressure through oxygen lance tube into the melt. The
oxidizing effect burns off the excess carbon in the molten metal thus reducing the percentage of carbon to an acceptable level.
Oxygen lance tube are used for opening furnace tap holes:
When the desired steel composition and temperature has been reached the furnace tap hole is opened through a combination of drilling and tapping using oxygen lances. Lances are coupled to a high-pressure oxygen supply the end of the lance is ignited and through careful and skillful manipulation the tap hole clay which can be up to
800mm thick is effectively burnt away, facilitating the pouring of the molten metal for further processing.
| Oxygen Lance | Working Pressure | ||||
| DN | INCH | OD(mm) | LENGTH | 5 Bar | 10 Bar |
| 6 | 118" | 10 | 1000/1800/3000/6000 | ca.15 Nm3fh | ca.35 Nm3 |
| 8 | 114" | 13. 5 | 100011800/3000/6000 | ca.45 Nm3fh | ca.90 Nm3 |
| 10 | 3/8" | 17 | 3000/5000/5500/6000 | ca.90 Nm3fh | ca.180 Nm3/h |
| 15 | 112" | 21.5 | 3000/5000/5500/6000 | ca.160 Nm3fh | ca. 290 Nm3/h |
| 20 | 3/4" | 26.7 | 3000/5500/6000/9000 | ca.360 Nm3fh | ca.700 Nm3/h |
| 25 | 33.4 | 3000/5500/6000/9000 | ca.600 Nm3fh | ca.1200 Nm3 | |
| 32 | 1-114" | 42 | 5000/5500/6000/9000 | ca.1200 Nm3/h | ca.2000 Nm3 |
| 40 | 1-112" | 48 | 5000/6000/9000112000 | ca.1900 Nm3/h | ca.3300 Nm3 |
| 50 | 2" | 60 | 5000/6000/9000/12000 | ca.3100 Nm3/h | ca.5600 Nm3fh |
