LM3104
Program
Combination
Linear
Continuous
Automatic Control
New
Customized
Plastic
Lm3104
CNRUIHUA
Carton
Zhejiang
8537101190
Product Description
Detailed Product Description
1. PLC control, temperature controller, sensor controller
2. CE approved
1. PLC control, temperature controller, sensor controller2. CE approved
| CPU Features | |||||
| Local I/O | 8 Channels DC24V DI, 6 Channels Relay DO | ||||
| Expandable I/O | 2 modules (unable to connect Ethernet modules) | ||||
| High-speed counter | Monophase counter: 3 points, 100KHz Biphase counter: 2 points, 100KHz | ||||
| Pulse output | N/A | ||||
| Pulse catch | 2 points | ||||
| Interrupt input | 2 points | ||||
| Analog potentiometer | 2, value setting range 0-255 | ||||
| User program memory capacity | 28K bytes | ||||
| Retain area | N/A | ||||
| Input data memory | 256 bytes | ||||
| Output data memory | 256 bytes | ||||
| Mid-variables memory | 1K bytes | ||||
| Global memory | 2K bytes | ||||
| Password | Yes | ||||
| Real-time clock | N/A | ||||
| Timer | No limit (1ms as minimum unit) | ||||
| Counter | No limit (Maximum counting range: 16 bit) | ||||
| Basic instructions | 283 | ||||
| Function blocks | Over 70 | ||||
| Operation speed | 0.65μs (Basic instruction) | ||||
| Power supply | 220V AC@50Hz | ||||
| Allowed range | 187V AC-242V AC@50Hz | ||||
| Current consumption (MAX) | 120mA | ||||
| Output voltage | 24V DC | ||||
| Allowed range | 22.8V DC-25.2V DC | ||||
| Power Supply Specifications | |||||
| Current output | +24VDC (To expansion bus) | 260mA | |||
| +24V DC (To the outside) | 200mA | ||||
| +5V DC (To expansion bus) | 800mA | ||||
| Short circuit protection | 400mA, 24VDC output | ||||
| Input Features | |||||
| Input type | Sink/Source | ||||
| Input voltage rated value | 24V DC | ||||
| Allowed range | 0V DC-30V DC | ||||
| Logic 1 signal | 15-30V DC, allowed minimum current 3mA | ||||
| Logic 0 signal | 0-5V DC, allowed maximum current 1mA | ||||
| Input delay time | <0.6ms (Rated input voltage) | ||||
| Isolation mode | Photocoupler isolation | ||||
| Isolation group | 2 groups | ||||
| Maximum Isolation Voltage | 1500VAC | ||||
| Output Features | |||||
| Output type | Relay | ||||
| Output voltage | 24V DC or 24 V AC -230V AC | ||||
| Allowed range | 5V DC-30V DC or 5V AC-250V AC | ||||
| Common end output current total | <10A | ||||
| Output switch capacity | 2A, resistance load | ||||
| Minimum load | 10mA (contact voltage 5VAC or 5VDC) | ||||
| Over current protection | N/A | ||||
| Contact impedance | <0.2Ω | ||||
| Isolation group | 2 groups | ||||
| Isolation voltage between coil and contact | 3000VAC, 1 minute, leakage current 1mA | ||||
| Isolation voltage between contacts | 750VAC, 1 minute, leakage current 1mA | ||||
| Isolation resistance (minimum) | 100MΩ (under 500VDC) between contacts or between coil and contact | ||||
| Contact switch delay time | <10ms | ||||
| Contact switch frequency (maximum) | 1Hz | ||||
| Relay mechanical life | No load: over 10,000,000 times; Rated Resistive load 2A: over 100,000 times | ||||
