The 1-X250 series straight-stroke pneumatic diaphragm actuator adopts a single-spring structure. Compared with the 1-X280 series, it is mainly used for long-stroke control, with a maximum stroke of 250mm. Compared with the pneumatic piston actuator, it has the advantages of high adjustment accuracy and light weight, and can also be used for cutting occasions. It is equipped with a pneumatic valve, a speed increaser, a fast discharge valve, etc., which can realize fast cutting, and the minimum fast cutting time can reach 1S.
| Type | PNEUMATIC DIAPHRAGM LINEAR ACTUATORS | ||||||||||||||||||||||
| Model | 1-X280 | 1-X250 | |||||||||||||||||||||
| Size | D12 | D25 | D33 | D39 | D46 | D63 | D63 | ||||||||||||||||
| Membrane Diameter(mm) | 218 | 262 | 333 | 395 | 465 | 640 | 640 | ||||||||||||||||
| Active Area(mm2) | 33567 | 48497 | 78343 | 110231 | 152763 | 289382 | 289382 | ||||||||||||||||
| Stroke(mm) | 17 | 17 | 25 | 17 | 25 | 34 | 45 | 17 | 25 | 34 | 45 | 25 | 34 | 45 | 60 | 34 | 45 | 60 | 76 | 100 | 120 | 150 | 200 |
| Handwheel | T | T/S | T/S | T/S | T/S | S | S | ||||||||||||||||
| Supply | 40psi,50psi,60psi (0.28Mpa,0.35Mpa,0.4Mpa) | ||||||||||||||||||||||
| Air Connect | 1/4" NPT | 1/4" NPT | 1/4" NPT | 1/2" NPT | 1/2" NPT | 1" NPT | 1" NPT | ||||||||||||||||
| Orientation Diameter(mm) | Φ55 | Φ60 | Φ60 | Φ76 | Φ76 | Φ95 | Φ128 | ||||||||||||||||
| Max. Output thrust(N) | 2185 | 2880 | 7696 | 12040 | 17353 | 26672 | 28242 | ||||||||||||||||
| Lag | ≤1%FS(With positioner )-GB/T4213-201 | ||||||||||||||||||||||
| Liner | ≤±2%FS(With positioner)-GB/T4213-2013 | ||||||||||||||||||||||
| Air chamber sealing | Pressure reduction value ≤5.0Kpa/5min-GB/T4213-2013 | ||||||||||||||||||||||
| Service life | ≥100000-GB/T4213-2013 | ||||||||||||||||||||||
| Ambient Temperature | Standard -10~+70 High Temperature -40~+100ºC | ||||||||||||||||||||||
| Coating Color | Bule | ||||||||||||||||||||||
| Attachments | Electropneumatic valve positioner ,Pneumatic valve positioner, filter reducing valve, plasticizing relay, solenoid valve, pneu- matic valve, lock valve, speed controller, limit switch | ||||||||||||||||||||||
| Position transmitter, manual mechanism, maximum adjustable mechanical limit, minimum adjustable mechanical limit | |||||||||||||||||||||||
Option | Special interface, specified coating, diameter of connection locating hole, extension length of push rod, thread at connection | ||||||||||||||||||||||
| Effective Thrust of Valve Stem (N/psi) | |||||||
| Model | 1-X280 | 1-X250 | |||||
| Action Mode | D12 | D25 | D33 | D39 | D46 | D63 | D63 |
| DA(Direct Action) | 220 | 222 | 409 | 580 | 828 | 1574 | 1569 |
| RA(Reverse Action) | 180 | 192 | 370 | 519 | 748 | 1420 | 1295 |
The membrane cover is made of stamped steel, the surface is alvanized+painted for corrosion prevention, and the paint is not easy to fall off;
The actuator bracket is made of cast steel or forged steel,and the structure is firm and reliable;
The diaphragm is made of neoprene, which has the characteristics of good resistance to aging damage, chemical attack and non deformation under continuous stress;
The material of the push rod is AISI420, the surface is extruded and nickelplated, with high finish and corrosionresistance;
The guide bushing is made of aluminum bronze, with good guance and small deformation at low temperature to ensure good sealing of the air chamber;
The lower part of the connection between the push rod and thbrackeis sealed with an Atype sealing ring to prevent the penetrationof oil, sand or dirt.
Application flexibility
All positive and reaction parts are interchangeable.
The spring installation position can be adjusted according to the stroke. The integrally cast aluminum tray has two installation positions, high and low, which are convenient for installation. You can also choose to install 3, 4 and 6 springs to
obtain different spring ranges;
Each specification of actuator has a variety of travel springs, which can be installed with a wide range of valve diameters;
There are two types of hand wheel mechanism: top-mounted handwheel and side-mounted handwheel. Inparticular, the side-mounted handwheel can be completely
separated from the actuator, which is very convenient
to install;The connection between the actuator and the valve adopts t
he pressing plate and sleeve structure, which is easy to install and replace the packing on site.
Adjustable upper travel limit: used to limit the travel of the actuator in the upward direction.
Adjustable lower travel limit: used to limit the travel of the actuator in the downward direction.
Top-mounted handwheel mechanism.
Side-mounted handwheel mechanism.
Low-temperature and high-temperature actuators: used for specific ambient temperature.
Low-temperature actuators Operating temperature:
- 60 ~70 ºC.
High-temperature actuators Operating temperature:- 20 ~100 ºC.
Actuator locking device: ensure that the actuator remains in the locking position during maintenance (the same as the actuator fault position).
Position transmitter, manual mechanism, maximum adjustable mechanical limit, minimum adjustable mechanical limit.
Other accessories are used for control circuit: positioner, pressure reducing valve, solenoid valve, limit switch, lock valve, booster, amplifier, pneumatic valve, etc
Actuator spring ranges(psi)
1-X280 SERIES SIDE HANDWHEEL
1-X280 series overall dimensions & mass
Service Life
1. The diaphragm cover is made of stamped steel with a galvanized and painted surface for corrosion resistance. The paint is designed to be durable and not easily peel off. The actuator bracket is made from cast or forged steel, ensuring a robust and reliable structure.
2. The diaphragm is constructed from neoprene rubber, offering excellent resistance to aging, chemical corrosion, and maintaining its shape under continuous stress.
3. The push rod is made of AISI420 with a nickel-plated surface, providing high smoothness and corrosion resistance.
4. The guide bushing is made from aluminum bronze, ensuring good guidance and minimal deformation at low temperatures, which maintains good air chamber sealing.
5. For the sealing, an A-type sealing ring is used below the connection point of the push rod and bracket to prevent oil, sand, or dirt from penetrating.
Application Flexibility
1. All direct-acting and reverse-acting parts are universal to ensure interchangeability.
2. The spring installation position can be adjusted according to the stroke. The integrally cast aluminum tray offers two installation positions: high and low, making installation convenient. Meanwhile, 3, 4, or 6 springs can be configured to achieve different spring ranges.
3. Each specification of the actuator comes with various spring options, accommodating a wide range of valve sizes.
4. There are two types of handwheel mechanisms: top-mounted and side-mounted. The side-mounted handwheel, in particular, can be completely detached from the actuator, making installation very convenient.
5. The connection between the actuator and the valve uses a compression plate and sleeve structure, facilitating easy installation and convenient on-site replacement of packing.
Actuator Options
1. Adjustable Upper Stroke Limiter: Used to limit the upward stroke of the actuator.
2. Adjustable Lower Stroke Limiter: Used to limit the downward stroke of the actuator.
3. Top-Mounted Handwheel Mechanism
4. Side-Mounted Handwheel Mechanism
5. Low and High-Temperature Actuators: Designed for specific environmental conditions.
6. Low-Temperature Actuators: Suitable for environments with temperatures ranging from -60°C to 70°C.
7. High-Temperature Actuators: Suitable for environments with temperatures ranging from -20°C to 100°C.
8. Actuator Locking Device: Ensures the actuator remains in a locked position during maintenance, which corresponds to the fail-safe position of the actuator.
9. Remote Venting: When natural gas or other hazardous gases are used as the actuator's air source, the actuator housing should be equipped with a venting device to prevent gas accumulation.
10. Additional Control Circuit Accessories: Positioner, pressure regulator, solenoid valve, limit switch, locking valve, booster
SNT Machinery(Qingdao) Co. , Ltd is a producer of control valves, combines manufacturing, designing, sales and services in one. It has high starting point quick development SNT is located in Qingdao, Shandong province with an area for 42000m2, equipped with modern workshop and production equipment. It is a high-tech enterprise with independent intellectual property rights and imported advanced management and production experience. Now it has more than 150 workers, and R&D specialist accounts for 15%, graduates or with higher degrees account for 30%. Depending on high quality production management team and innovative technology research and development, now we produce large quantities of high quality vales used in petrochemical, oil and coal chemical industries. We have a sales value to nearly 100billion in the year 2017.
Now SNT has got the TS special equipment manufactuuring certificate and ISO 9001, and has acquired the net qualification certificate of SINOPEC,CNOOC, PETROCHINA and SINOCHEM. And we have got the National Patent in many technologies. We can design and manufacture all series of valves according to ANSI, API, DIN, BS, JIS standards. Combining the advantages of famous valves all cross the world and with independent research and development, until now we can manufacture all kinds of valves, including GLOBE, High Pressure Boiler Blow-down Valves, High-performance Butterfly Valves, Angle-regulating Valves, Eccentric Rotary Valves, T Three-eccentric Center Butterfly
Valves, V Ball Valves, High Wear-resistant Ball Valves, High Pressure Steam Valves, Micro-flow Control Valves, Self-operated Control Valves, Cryogennic Valves tc, Driving form includes manual operation, power-drinven, pneumantic and hydraulic drive. Materials for main parts are A216WCB, A217 WC6/WC9, A351 CF8/CF8M/CF3/CF3M etc. Specification 1/2"~120", working pressure ANSI 150#~2500#, working temperature -196ºC~1100ºC.
Relying on advanced production technology management and qulity assurance system, SNT Valves have been widely used in petrochemical, oil, steel&iron, paper manufacturing and power station industries. Our customers include SINOPEC QILU branch, SINOPEC Qingdao branch, CNOOC Huizhou Refinery, PETROCHINA Guangxi branch, PETROCHINA Ningxia branch, SINOPEC Qingdao Refinery, SINOPEC Qingdao branch, CNOOC Huizhou Refinery, PETROCHINC Guangxi branch, PETROCHINA Ningxia branch, SINOPEC Changling branch, Jinan branch etc.
We make user's profits as our priority, devoting ourselves to the establishment of excellent quality and good brand, Our perfect quality assurance and after-sales systems guarantee that SNT valves join hands with all our customers and creat prosperity.
