kg800D
Gas
Ordinary Temperature
Pneumatic
Thread
Brass
Ordinary Pressure
DC Solenoid Valve
Flow Control
Numur
Industrial Usage
220VDC
3W
-20°c~+60°c
Exd II CT4
IP67
G1/2
125mA
Hazardous Locations
KGSY
Wooden Case
Made in China
Product Description
According to the product design, these valves use filtered inert gas or air. The working pressure shall not exceed the maximum allowable pressure of 8 bars, and the minimum medium or ambient temperature is -10 10 oC. The installation and maintenance of valves must be carried out by qualified personnel. When installing the valve with ex-mark, make sure that all metals or conductors are effectively grounded and the valve body is grounded through solid bolts.
Pneumatic connection and instructions:
1. Connect the conduit according to the instructions on the nameplate, and the solenoid valve interfaces are G1 and 4
2. Air inlet 1 (inlet of main air supply)
3. Air outlets 2 and 4 (connecting the working hole of the actuator)
4. Exhaust ports 3 and 5 (install muffler)
Description of working principle:
1. When the power is off, 1 and 2 are connected; there is gas at port 2 and no gas at port 4, and the valve is closed.
2. When the solenoid valve is powered on, ports 1 and 4 are connected; there is no gas at port 2 and gas at port 4. The valve is opened. When the power is off, the valve will close automatically.
3. If the valve needs to be opened for a long time, the solenoid valve coil needs to be energized for a long time and will be closed automatically in case of power failure( Double coil control is recommended)
4. When the solenoid valve controls the single-acting actuator, the solenoid valve selects the two-position three-way state (the plug of port 2 is blocked). When powered on, 1 and 4 are connected, the valve opens, and when powered off, the valve closes automatically.
| Model | KG800-AS (single control), KG800-DS (double control) |
| Material of Body | Stainless steel, 316L |
| Surface Treatment | Electrolysis polishing |
| Sealing Element | nitrile rubber buna "O"ring |
| Dielectric Contact Materia | Stainless steel 316, nitrile rubber buna,POM |
| Valve Type | 3 port 2 position, 5 port 2 position |
| Orifice Size (CV) | 25mm²(CV=1.4) |
| Air Entry | G1/4.BSPP.NPT1/4 |
| nstallation Standards | 24x32 NAMUR board connection or pipe connection |
| Fastening Screw Materia | 304 stainless steel |
| Protection grade | P66/NEMA4,4X |
| Explosion proof grade | Exd CT6,DIPA20 TA,T6 |
| Working temperature | 20ºC to 80 ºC |
| Working Pressure | 1 to 10 bars |
| Working medium | Filtered (<=40um) dry and lubricated air or neutral gas |
| Control Model | Single electric control or double electric control |
| Product life | More than 3.5 million times (under normal working conditions) |
| nsulation Grade | F Class |
| Voltage &Consumed Power | 24VDC-3.5W/2.5W(50/60HZ) |
| 110/220VAC-4VA,240VAC -4.5VA | |
| Coil Shell | Stainless steel 316 |
| Cable Entry | M20x1.5,1/2BSPP,or 1/2NPT |
Q & A:1. What products are produced by your factory?
Answer: We, KGSY, are a real factory; we produce all kinds of pneumatic valve accessories, like air actuator, limit switch box, solednoid valves, air filters, declutch gear operator, electro-pneumatic positioners, adapters, etc.
We also assemble whole set of pneumatic ball valves & butterfly valves.
2. What international approval have you got?
Answer: At present, we have been approved with CCC, CE, IECEx, ATEX, UKCA, and EAC certificate.
3. How long is the sample time?
Answer: Usually, it will take 7 working days to make a sample.
4. How long is the lead time of a mass order?
Answer: We promise 25 days for each order, and nearly 99.9% of orders will be finished on schedule.
5. What's your strength?
Answer: We are a real factory; we have our own R&D team and control the quantity and production time absolutely.
At the same time, we own the advantage of a trading company, which includes efficient communication and a strong ability to gather goods on the basis of specialty.
