SKS11 alloy tool steel
Alloy Steel Bar
JIS
Ferrous Steel Scrap
Hot Forged or Hot Rolled
Round,Flat or Square
Polished,Grinded or Peeled
Cutting Tool
Tool Steel Bar
Square/Round Bar: 12~ 500mm Flat:10~155 X 50~ 800m
FUSHUN
Seaworth Packing
Huangshi, Hubei
Product Description
Features:
Competitive price
immediate delivery
Premium quality
Reliable service
Size available:
Square/Round Bar: 12~ 500mm
Flat:10~155 x 50~ 800mm
Applications:
SKS11 is used in a wide range of applications -Cutting tool,dies for cold drawing,center drill.
SKS11 chemical composition(%):
Surface condition: SKS11 with black surface, polished surface, grinded surface, peeled surface, milled surface.
Heat treatment & hardness of steel:
Smelting & Shaping: EF, EF/EAF+LF+VD, EF/EAF+ESR, hot forged/ hot rolled
Delivery condition: SKS11 with hot rolled, forged, annealed, quenched and tempered ,or as your special requirements
Marking: Grade, heat NO. length will be stamped on each bar with required color.
Ultrasonic Test:Material will be ultrasonically tested at appropriate stages of the manufacture
to ensure the quality, as agreed between seller and purchaser.
Quality assurance: ISO9001 certified, IQNet, CQC
Introduction:
1.SKS11 widely used for cutting tool.
2.SKS11 with excellent combination of high toughness and resistance to thermal fatigue cracking.
3.SKS11 with good stability in heat treatment..
Competitive price
immediate delivery
Premium quality
Reliable service
Size available:
Square/Round Bar: 12~ 500mm
Flat:10~155 x 50~ 800mm
Applications:
SKS11 is used in a wide range of applications -Cutting tool,dies for cold drawing,center drill.
| Packing details | In seaworthy packing, as your requirement. |
| Delivery details | within 30-50 days |
SKS11 chemical composition(%):
| C | Si | Mn | P | S | Cr | W | V |
| 1.40~1.30 | 0.35max. | 0.50 max. | 0.030 max. | 0.030 max. | 0.20~0.50 | 3.00~4.00 | 0.10~0.30 |
Surface condition: SKS11 with black surface, polished surface, grinded surface, peeled surface, milled surface.
Heat treatment & hardness of steel:
| Annealed hardness(HB) & Annealed temperature(ºC) | 241 max,780 to 850 slow cooling |
| Quenched and tempered hardness(HRC) & Heat treatment temperature(ºC) | 62 min,Quenching: 790 water quenching,Tempering:180 air cooling |
Smelting & Shaping: EF, EF/EAF+LF+VD, EF/EAF+ESR, hot forged/ hot rolled
Delivery condition: SKS11 with hot rolled, forged, annealed, quenched and tempered ,or as your special requirements
Marking: Grade, heat NO. length will be stamped on each bar with required color.
Ultrasonic Test:Material will be ultrasonically tested at appropriate stages of the manufacture
to ensure the quality, as agreed between seller and purchaser.
Quality assurance: ISO9001 certified, IQNet, CQC
Introduction:
1.SKS11 widely used for cutting tool.
2.SKS11 with excellent combination of high toughness and resistance to thermal fatigue cracking.
3.SKS11 with good stability in heat treatment..
