Industrial Heavy Duty storage racking customized warehouse Steel Pallet Rack for logistics, which is also known as conventional pallet rack system, is one of the popular solutions for industrial palletized goods storage. It is compatible with all type of handling equipment. It is efficient and 100% selectivity. It is simple and good for first in first out application. Its disadvantage is low utilization of floor space. The system is found in many warehouses, logistic center, commercial distribution center etc.
Industrial Heavy Duty storage racking customized warehouse Steel Pallet Rack for logistics provides direct access to all pallets for 100% accessibility and great stock rotation. Pallets can be located, accessed and moved individually providing rapid handling of palletized goods.
The pallet rack is compatible with different types & sizes of pallets, as well as the most types of handling equipment, which can satisfied with most of the industrial steel racking systems for better storage solutions.
1. The frames are composed of 2 uprights and a number of diagonals. The frames are bolted, resulting in a lower repair cost if they are damaged by lift trucks. Each connection is secured with a lock-nut.The wide range of types of frames allows the rack construction to be optimized for heights of up to 15 m and bay-loads of up to 30 tons. The uprights are very accurately cold-formed and they can be produced in lengths of up to 15m.
2. The beam is composed of two cold-formed C-profiles. It is very resistant to torsion and provides great stiffness in both horizontal and vertical directions, with a load bearing capacity of up to 4 tons per beam level.
The pallet rack storage system consists of a full range of basic components and accessories to fulfill all of your requirements. The system is designed for the optimized storage of goods of all sizes and weights. All components have been thoroughly tested to determine their mechanical properties. These are used to calculate the safe load capacity of each component and ensure that they meet the stringent requirements for Pallet Racking.
We offer a variety of pallet rack accessories such as Pallet support bar, Wire mesh decking, Grating panel, Steel shelves, Corner guard, Barrier, Frame protector, etc. , to help keep your products safe.
| Raw Mateiral | High Tensile Carbon Steel, Q235B & Q355B, or SGH440/SGH490 Hot dip Galvanized Steel rolls. |
| Product Type | Selective Pallet racking (suitable to double deep pallet rack, VNA pallet rack) |
| Origin | Produced in Jiangsu Province, China |
| Steel Specifications | Tensile strength>400Mpa Yiled Strengh>235Mpa. |
| Finish Specificaiton | Epoxy-Powder Coating,Polymerized at 200 °C, Film Thickness >60μm |
| Material Thickness | As per design of loading requirment, the upright thickness from 1.8mm to 3.0mm, the beam thickness from 1.5-2.0mm |
| Loading Capacity | Frame Load up to 30 tons, Beam Load up to 4 tons UDL per level. |
| Design Standard | Conform to FEM standard, SEMA standard and China National Standard. |
1).Packaging details: Standard export package.
Long profiles are packed in bundles on plywood or steel pallets, and covered by plastic films. Between each package, air bags are also filled if necessary. For the thinner material such as steel decking, Edge protectors are applied. The small accessories and fasteners are packed inside of the carton boxes and fixed on pallets.
2).Delivery time: For the standard products, Our delivery time is 3 weeks after receipt of the 30% deposit. Other special application of racks can be delivered within 4-5 weeks.
Pallet rack installation instructions:
• Determine a starting line and carry out a floor marking.
• Erect the first rack bay making sure that the beam elevations are correct.
• Make sure that the safety locks that prevent the beams from becoming dislodged are working properly.
• When installing the anchor bolts, the erector should refer to the anchor bolt instructions to obtain the torque values for the anchors.
• Remaining bays can then be installed making sure that the rows are straight on the line and that the subsequent frames remain plumb in both the down-aisle and the cross-aisle directions.
• The installation of the column protectors should be considered prior to anchoring of the racks
• Shelf accessories, such as crossbars or wire decking, should be installed after the rack row frame and beam installation is complete, all the bolts are tightened and the rack has been anchored.
FACTORY INTRODUCTION:
The company's manufacturing base is located in Zhenjiang, Jiangsu Province, the plant covers an area of 18,000 square meters, more than 80 employees. The factory is equipped with a number of high-precision roll-forming production lines, automated welding, laser cutting, sheet metal processing equipment and two fully automatic electrostatic powder coating lines. Professional sales engineers are responsible for the whole process from project planning and design, proposal discussion, to product supply, engineering implementation, project management and after-sales service.
Our advantages: professional logistics planning and design, high-precision manufacturing and intimate after-sales service.
Before you send us your request for quotation, please make sure the following information are collected.
Please send us the following information unless you already have the material bill of quantities with full specifications:
- Pallet size L*W*H, pallet entry side, Overall height of the goods with pallets.
- Loading weight per pallet for design purpose.
- Warehouse layout CAD drawings, including Clear height of the warehouse.
- Your forklift information, working aisles width, forklift max. reaching height.
- Your intra logistic flow..
