OptiXstar C810 E (AC)
Fiber Transceiver
Integrated Wiring
CE, ISO, RoHS, GS
New
Optixstar C810 E (AC)
44 mm X 320 mm X 220 mm
2.2 Kg
Installed on a Desk;Tmounted on a Wall; Cabinet
2 X Otu1/Otu0 or 2 X Stm-16/Stm-4/Stm-1
2 × 2.5 Gbit/S
AC: 100 V to 240 V; DC: -48 V to -60 V
10g
Osu Qos Mpls-Tp Ethernet Oam Mpls-Tp
64 Bytes to 9600 Bytes. The Default Value Is 9600
50/60
-25 to +65
1 Hour
Distinguished Architecture
Secure Data Transmission
HUA WEI
Strong and Fast
weight 2.2 Kg
Guangdong China
Product Description
Product Highlight
Small Volume, Low Power Consumption, and High Adaptability
☆ The OptiXstar C810 E is compact (H x W x D: 44 mm x 320 mm x 220 mm), energy-saving, and consumes ultra low power.
☆ It supports various installation modes, such as desktop-, wall-, and cabinet-mounted installation, enabling flexible deployment.
☆ It supports external power supply for 1+1 power supply protection.
Various Service Interfaces and Flexible Cross-Connection Grooming
☆ The OptiXstar C810 E supports E1, GE, FE, STM-4, and STM-1 interfaces to meet the access requirements of various services on the client side.
☆ It supports OSUflex cross-connection grooming and provides lower latency, more connections, and higher bandwidth utilization.
☆ It supports configuration of L1/L2 services for ports on the client side and upstream 2 x 2.5 Gbit/s bandwidth on the line side.
E2E Management Facilitates Agile Provisioning of Private Line Services
After the OptiXstar C810 E is powered on, it can be managed and controlled by NCE and implement E2E private line service provisioning within minutes.
Hardware Specifications
| Item | Specification | |
| Dimensions (H x W x D) | 44 mm x 320 mm x 220 mm | |
| Weight | About 2.2 kg | |
| Typical power consumption | 30 W | |
| Maximum power consumption | 42 W | |
| Circuit breaker specification | 6:00 AM | |
| Standard working voltage | l DC: -48 V to -60 V | |
| l AC: 100 V to 240 V | ||
| Power protection | Support optional external power supply module for power backup | |
| Installation mode | l Installed on a desk | |
| l Mounted on a wall | ||
| l Installed in an cabinet | ||
| Client-side capability | l E1-1 to E1-4: 4 x E1 | |
| l FE/GE COMBO 5 to 8: 4 x GE/FE (electrical ports/ optical ports) | ||
| l FE/GE/SDH 9 to 12: 4 x GE/FE/ STM-1/4 (optical ports) | ||
| NOTE | ||
| Ÿ Ports 5 to 8 support L2 services and each of ports 9 to 12 supports either L1 or L2 services. | ||
| Ÿ Ports 5-8 are combo ports that support electrical or optical ports. Optical ports are incompatible with electrical modules. Ports 9 to 12 are compatible with GE electrical modules. | ||
| Line-side capability | 2 x OTU1/OTU0 or 2 x STM-16/STM-4/STM-1 | |
| Maximum upstream bandwidth | 2 × 2.5 Gbit/s | |
| Service Mapping Path | l E1<->STM-16/STM-4/STM-1 | |
| l E1<->STM-4/STM-16<->ODU0/ODU1<->OTU0/OTU1 | ||
| l FE/GE/STM-1/STM-4<->ODU0<->OTU1/OTU0 | ||
| l STM-1/STM-4<->STM-16/STM-4/STM-1 | ||
| l STM-1/STM-4<->STM-4/STM-16<->ODU0/ODU1<->OTU0/OTU1 | ||
| l ETH<->ODU0/ODU1<->OTU0/OTU1 | ||
| l ETH <-> OSUflex <-> ODU0/ODU1 <-> OTU0/OTU1 | ||
| l ETH<->STM-4/STM-16<->ODU0/ODU1<->OTU0/OTU1 | ||
| l ETH<->STM-16/STM-4/STM-1 | ||
| Service cross-connect capacity | OTN | 10G |
| NOTE | ||
| The service cross-connect capacity is shared by ODUk and OSUflex. | ||
| SDH | Higher order: 12.5G; lower order: 5G | |
| Packet | 8G | |
| OTN functions | OSU | Supported |
| NOTE | ||
| l The OSU function requires license authorization. | ||
| l The board supports a maximum of 32 OSUflex channels. | ||
| Protection type | ODUk SNCP, OSUflex SNCP | |
| Physical-layer clock | Supported | |
| OTN performance monitoring | Supported | |
| Delay measurement | Supported | |
| ALS | Only supported by the client service mapping path | |
| Packet functions | Protection type | LAG |
| QoS | Ingress DS mapping and rate limitation on client-side ports | |
| Ethernet OAM | Supported (CC/LB/LT/LM/DM) | |
| MPLS-TP OAM | Not supported | |
| Delay measurement | Supported | |
| E-line | EPL/EVPL, including QinQ private line | |
| NOTE | ||
| A maximum of 960 E-Line services can be configured in the packet + EoS service mapping path. | ||
| SDH functions | Protection type | VC-4 SNCP, VC-3 SNCP, VC-12 SNCP, 1+1 linear MSP |
| Physical-layer clock | Supported | |
| PRBS | Supported | |
| NOTE | ||
| When a VC4 cross-connect is configured, it is necessary to deactivate the cross-connect before performing the PRBS test. | ||
| EoS functions | EoS capacity | 5G |
| VCTRUNK specifications | Quantity: 8 | |
| l Each VCTRUNK can be bound to a maximum of 8 x VC-4s, 24 x VC-3s, or 63 x VC-12s. | ||
| l An NE supports a maximum of 32 x VC-4s, 48 x VC-3s, or 504 x VC-12s. | ||
| Protection type | LCAS, LAG | |
| QoS | VCTRUNK shaping | |
| E-line | EPL/EVPL, including QinQ private line | |
| NOTE | ||
| Ÿ A maximum of 960 E-Line services can be configured in the packet + EoS service mapping path. | ||
| Ÿ For C-VLAN transparent transmission E-Line services of the EVPL type, the VLAN list can be configured, and each VLAN ID occupies one service. | ||
| Port MTU | 64 bytes to 9600 bytes. The default value is 9600 bytes. | |
| Port loopback | Supported | |
| Power-off notice | Supported | |
| NCE Controller | l Automatic rollout | |
| l E2E service provisioning | ||
| l Automatic service provisioning | ||
| l Bandwidth on demand (BoD) | ||
| l Delay measurement | ||
| l Latency map | ||
| Device operating temperature | -25°C to +65°C | |
| NOTE | ||
| If the device runs at a temperature ranging from -5°C to +55°C, commercial optical modules can be used. If the device runs at a temperature ranging from -25°C to +65°C, industrial optical modules must be used. | ||
| Device operating humidity | l Long term: 5% to 85% | |
| l Short term: 5% to 95% | ||
| NOTE | ||
| A short term refers to a maximum of 96 consecutive operating hours and a total operating time of no more than 15 days in a year. | ||
| Mean time to repair (MTTR) | 1 houra | |
| NOTE | ||
| The MTTR is related to the specific configuration of a device, including the average time for locating a fault on site, replacing a board, restarting the device, and recovering services. The traveling time is not included. | ||
| Mean time between failures (MTBF) | l AC: 90.18 yearsa | |
| l DC: 90.15 yearsa | ||
| a: The preceding parameter values are calculated based on the typical product configuration. The parameters vary according to the configuration module. | ||
The product is 100% genuine and has sufficient stock in stock;
Price discounts and fast delivery;
After sales service guarantee; Support sample and customization services.
Q: Are you a trading company or a manufacturer? Can I use our own logo and label?
A: We are a trading company that provides domestic and international trade services. We also provide OEM/OEM services.
Q: What are the guarantees for product quality?
A: We have professional engineers who test each piece of equipment before shipment to ensure that the shipped products are in good condition.
Q: How did you resolve a defective product when I received it?
A: We have professional personnel to help you solve the problem. If the product is defective, we usually offer you a return, refund, or replacement of the defective product.
Q: What is your payment method and delivery time?
A: We accept credit cards, wire transfers, PayPal, and other payment methods. We also support fast shipping within 72 hours.
Q: What is the MOQ and how long is the warranty period?
A: The minimum order quantity for normal products is 1, and the product warranty period is usually 1 year.
