HJ-68
Lifetime Maintenance
1 Year
Material Testing Machine
0.5
Electronic Load
Digital
Computer Control
0-100Kg
AC220V
1/10,000
1000mm
Custom
Knob (Ten Turns)
Hongjin
Fumigation-Free Standard Export Wooden Box
China
Product Description
Scope of application:
Table type tensile testing machine
suitable for metal or non-metal (including composite materials), rubber plastics, adhesive materials tensile, compression, bending, shearing, stripping, tearing, load retention, static mechanical properties of the test analysis; With three closed-loop control modes of stress, strain and displacement, the maximum force, tensile strength, peel strength, bending strength, compression strength, elastic modulus, elongation at break, bending strength and service strength can be obtained.
Equipment features:
The machine adopts single-arm structure. The main machine is composed of column, upper beam, middle beam and workbench. The speed control system is installed in the lower part of the workbench. The servo motor with high speed regulation precision, wide range and stable performance drives the ball screw pair to rotate through the synchronous gear belt deceleration system. The ball screw pair drives the middle beam and drives the tensile attachment (or compression and bending attachment) to move up and down to realize the loading and unloading of the sample. The structure has the advantages of high stiffness, high efficiency and stable transmission.
Product parameters:
Table type tensile testing machine
suitable for metal or non-metal (including composite materials), rubber plastics, adhesive materials tensile, compression, bending, shearing, stripping, tearing, load retention, static mechanical properties of the test analysis; With three closed-loop control modes of stress, strain and displacement, the maximum force, tensile strength, peel strength, bending strength, compression strength, elastic modulus, elongation at break, bending strength and service strength can be obtained.
Equipment features:
The machine adopts single-arm structure. The main machine is composed of column, upper beam, middle beam and workbench. The speed control system is installed in the lower part of the workbench. The servo motor with high speed regulation precision, wide range and stable performance drives the ball screw pair to rotate through the synchronous gear belt deceleration system. The ball screw pair drives the middle beam and drives the tensile attachment (or compression and bending attachment) to move up and down to realize the loading and unloading of the sample. The structure has the advantages of high stiffness, high efficiency and stable transmission.
Product parameters:
| Capacity selection (kg) | 50, 100kg | Unit switching | Kgf, lbf, N, kN |
| Load reresolution | 1/10,000 | Load accuracy | Plus or minus 1% |
| Maximum stroke (excluding fixture) | 1000mm | Speed input mode | Knob (ten turns) |
| Test speed | 30-300mm/min | Displacement resolution | The 0.001 mm |
| Data sampling frequency | 100Hz | Power supply | AC220V can be specified by country or country |
| display | Real-time value, maximum (peak) has the pull stop, upper and lower limit Settings, point ratio setting real-time value, maximum (peak) displacement, maximum and lower limit of elongation, breakpoint ratio Settings | ||
| motor | Stepper motor | Rotating rod | Ball screw or ordinary screw |
| Main engine size | 490x380x186cm | Machine weight | 90kg |
