Natural Frequencies : 10 to 25 Hz
S.T.C. Anti vibration Mount are designed for multi-directional vibration isolation, shock attenuation and noise reduction due to structure-borne vibrations. These one-piece, fail-safe mounts are easy to install and provide consistentperformance.
S.T.C. supports consist of a rubber ring stuck to a central tube so that the lower bezel supports the assembly.
The design of this support gives it special characteristics: simple assembly, work under compression, effective anti-rebound and fail-safe mounting.
The S.T.C. mount comprises a rubber ring bonded to a central tube.
· Inner tube : mild steel
· Bonded rubber in the form of a ring at the top with a collar below which is used for fixing.
Operation
The design of the S.T.C. mount gives the following basic characteristics :
· the rubber works in compression;
· anti-rebound;
· can be used as safety mounting.
Advantages
· Simple to fix.
· Simple and economical
· Extensive range of loads.
| Reference | Ø A (mm) | B (mm) | Ø C (mm) | ΦD (mm) | E (mm) | ΦF (mm) | G (mm) |
| 539887 | 20,6 | 17,5 | 10 | 27,7 | 5,6 | 20,6 | 8 |
| 539190 | 31,5 | 25,4 | 13 | 44,5 | 10,4 | 31,5 | 10 |
| 539886 | 34,3 | 35 | 13 | 50,8 | 13,5 | 34,3 | 16 |
| 539191 | 41,1 | 44,5 | 16 | 63,5 | 15,7 | 41,1 | 19 |
| 539920 | 38 | 23 | 16 | 64 | 16 | 38,5 | 19 |
| 539951 | 56,6 | 50,8 | 20 | 95 | 25,4 | 56 | 20 |
Assembly
Office Factory Show Room
