34mm
ISO9001:2008
Alternate Tooth
0
Cutting
Band Saw Blade
Uncoated
HSS Saw Blade
Customized
2/3t,3/4y
10-25 Days
y-tools
Carton or Wooden Case
34 mm
China
8202201000
Product Description
1.Owning super high hardness,high red hardness and high wear resistance. 2.It shows excellent performance on cutting hard material,such as titanium alloy ,stainless steel.quenched steel ,raw iron,Nickel-based alloy cast steel.
3.The unique tooth shape design makes it have the excellent aility to chip removal. 4.The exquisite technology for the back material makes the bandsaw blade improve the anti-fatigue strengh.
| Front Angle | The range of the cutting material | Steel types | Note | ||
| 0° | 1.the profile angle is bigger and the strength is higher, so it's suitable for cutting different kinds of the material | It's better to choose the bigger front tooth agnle when the stiffness for the procee system is poor or the power for the saw machines is shortage | |||
| 0°~5° | 1.suitable for cutting brittle materials; | Such as: gray cast iron, | |||
| 2.suitable for cutting hard material; | High speed steel and chilled cast iron, tool steel, alloy steel, spring steel, high quality carbon structural steel, bearing steel, steel, martensite stainless steel and heat resistant steel | ||||
| 3.Suitable for interrupted cutting or the forging ,casting with crustaceous; | (HT200,65Mn,W18Cr4V,T12,50Cr,60Si2MnA,1Cr12,1Cr13,GCr15) | ||||
| 4.applicable to small section,thin walled pipe | |||||
| 6°~10° | 1.applicable to the workpiece material strength,low hardness, and good plasticity | Such as: ordinary carbon structural steel, high quality carbon structural steel, alloy steel, carbon tool steel and austenitic stainless steel, nodular cast iron, nonferrous metals | |||
| (Q235-A,20,30,45,T10,40Cr,20CrMo,1Cr18Ni9Ti,Cu | |||||
| 2.suitable for cutting solid material,thick walled pipes | And so on) |
