EC30A00V02
Rotary Encoder
Incremental
Contact
Contact Brush Type
Voltage Output
Empty Type
-
-
Taowaves
-
Support Customization
TAOWAVES
Carton
30mm
China
Product Description
High quality 30mm incremental encoder Hollow shaft 16 pulses rotary Encoder for microwave
EC30 Series Product Specifications
Our Factory
Application:
FQA:
1.What are the advantages of your factory?
Our factory has mold manufacturing workshop, plastic injection molding workshop and lathe center. 80% of the raw materials are supplied by ourselves to ensure that the quality and delivery speed are higher than those of our peers.
2.Do you support customization?
Yes, customization is supported, we need you to provide drawings, usage and requirements.
3.What is your shipping port and the term of payment ?
Ex-work or FOB Shenzhen.
30% paid in advance, 70% balance before shipment by T/T.(First transaction requires 100% payment in advance.)
4.How long is your lead time?
It will take 3workdays for samples,7-15workdays for mass production.
5.Can I get samples from you?
Small amount of samples can be provided for free, but customers need to pay for air freight themselves.
6.What's your MOQ ?
Our MOQ is 2K. If it is a small batch order, the price needs to be increased appropriately.
EC30 Series Product Specifications
| 1.Electrical Characteristics | |
| Rated voltage: | DC 5V |
| Resolution: | 16pulses/360° |
| Insulation resistance: | 10MΩ Min at DC 50V |
| Dielectric strength: | 1 minute at AC300V |
| Phase Difference: | 16≥5.0ms |
| 2.Mechanical Characteristics | |
| Total ratational angle: | 360°(Endless) |
| Detent torque: | 2±20mN.m.(20-200gf.cm) |
| Shaft wobble: | 1.0*L/30mm p-p Max(L:shaft length) |
| Push-Pull Strength of shaft | 10N |
| 3.Endurance Characteristics | |
| Rotational life: | 30,000cycles |
| Operating temperature range: | -20ºC to 80ºC |
| Storage temperature range: | -40ºC to+85ºC |
Our Factory
Application:FQA:
1.What are the advantages of your factory?
Our factory has mold manufacturing workshop, plastic injection molding workshop and lathe center. 80% of the raw materials are supplied by ourselves to ensure that the quality and delivery speed are higher than those of our peers.
2.Do you support customization?
Yes, customization is supported, we need you to provide drawings, usage and requirements.
3.What is your shipping port and the term of payment ?
Ex-work or FOB Shenzhen.
30% paid in advance, 70% balance before shipment by T/T.(First transaction requires 100% payment in advance.)
4.How long is your lead time?
It will take 3workdays for samples,7-15workdays for mass production.
5.Can I get samples from you?
Small amount of samples can be provided for free, but customers need to pay for air freight themselves.
6.What's your MOQ ?
Our MOQ is 2K. If it is a small batch order, the price needs to be increased appropriately.
