HC
CE, ISO9001
Carbon Steel
New
1 Year
30L/Min
3/4" 1"
-25degc / +125 Degc
15*4*4 Cm
None
NBR
1.7
Bsp
Fittings
Hydraulic Quick Couplings
Poppet
160 MPa
Construction Machinery
FEIMAN
China
Product Description
Product Description
HC hydraulic quick Couplings use a screw thread connection. The female coupling has a wing nut sleeve which enables operators to connect the couplings by hand, even when there is low residual pressure in the line.
Hydraulic quick coupling is designed for use on mobile plants such as commercial vehicle trailers, agricultural equipment, and construction plants.
Features and Materials
Materials:
1. Body: steel (Yellow zinc-chromate plating)
2. Seal:NBR
3. Thread: BSP female thread, other thread available for customized order
4. Wide Variety of Materials Available, we can design and change the coupling according to Customers' requirement
Features:
1. Heavy-duty design as standard
2. Heavy-dust wing nut is ruggedly built specifically to withstand the hammer blows commonly used to tighten and loosen thin couplers.
3. The steel nipple body is hardened for durability
4. Assembled valve seal can permit full pressure to connect and disconnect, without seal washout
5. Connect with pressure up to 5 MPA if possible
6. Disconnection by unscrewing the two parts, and shutting off by poppet valve. This coupling is mainly applied for Agriculture, Industry, hydraulic tools, Earthmoving, Building & Construction.
Specifications
Body Size(Inch) | 3/4 | 1 |
Rate pressure(Mpa) | 36 | 30 |
Rated Flow(L/Min) | 120 | 160 |
Temperature Range | -25°C to +125°C | |
