HD-100V30A
12 Months Warranty & Life-Time Sale Service
1 Year
Finished Batteries Tester
All
Lithium-ion Battery
Customized
AC380V
0V ~ 100V
6V ~ 100V
1mv
1mA
HONGDIAN
Wooden Case
SIZE: 686mm X 700mm X 1470mm
China
9030899090
Product Description
Product Description
Battery charging and discharging tester is a special instrument for testing lithium battery pack, lead-acid battery pack, portable mobile power module and other battery packs with full series voltage 30V, 60V, 100V, 120V, using the current advanced test technology theory, and has made a series of breakthroughs in the research and application of new technologies, new components, new materials and new processes. It is designed according to the requirements of relevant national testing and maintenance regulations, and is a special testing instrument for fixed battery performance testing. It has the advantages of large discharge power, small size, light weight and complete functions of data management software of upper computer, which can greatly reduce the workload of daily testing and maintenance of fixed battery.
AC Input Parameters
| Item | Technical Parameters |
| Wiring Method | AC380V Three-Phase Five-Wire System |
| Input Power Supply | AC380V |
| Power Factor | ≥99%(full load) |
| THDi | ≤5%(full load) |
| Maximum feedback efficiency | ≥92%(full load) |
DC output parameters
| Item | Technical Parameters |
| Voltage range | Charging Voltage: 0V ~ 100V Discharging Voltage: 6V ~ 100V |
| Voltage Accuracy | ±0.05%FS |
| Voltage Resolution | 1mV |
| Current Range | 0 ~ 30A |
| Current Accuracy | ±0.05%FS |
| Current Resolution | 1mA |
| Current Response Time | 10ms(10%FS ~ 90%FS) |
| Charge/Discharge Conversion Time | 20ms(-90%FS ~ 90%FS) |
| Channel Control Mode | All channels can be independently controlled. |
| Auxiliary channels | Each channel is equipped with an auxiliary temperature channel. |
Step Function Features / Function Features of Operation Steps
| Item | Technical Parameters |
| Minimum Data Logging Time | 10ms |
| Editable Number of Steps | 2000 |
| Number of Step Cycles | 65535 |
| Step Cycle Nesting | 5 |
| Charge and Discharge Modes | Idle, Pause, Constant Current Charge (CC), Constant Voltage Charge (CV), Constant Resistance Charge (CR), Constant Current Constant Voltage Charge (CCCV), Constant Power Charge (CP), Constant Current Discharge (DC), Constant Power Discharge (DP), Constant Resistance Discharge (DR), Direct Current Internal Resistance Test (DCIR) |
| Termination Criteria | Voltage, Current, Capacity, Energy, Time, Power, Cycle Count, BMS Parameters, Custom Advanced Parameters (Supporting Single or Multiple Logic AND/OR Combinations) |
| Execution Action Types | Jump, Pause, Protect, Next Step |
| Importing DBC Files | Supports File Editing, Saving, and Importing |
| Direct Current Internal Resistance Testing (DCIR) | Supports DCIR (Direct Current Internal Resistance) test steps, hardware real-time calculation, and supports two types of tests: (V1-V2)/(I1-I2) and (V1-V2)/I. |
| Data Export Methods | Export data in Excel and CSV formats. |
Protection Functions
| Item | Technical Parameters |
| AC-Side Protection | AC Grid Voltage Over/Under Voltage Protection, Surge Protection, Anti-Islanding Protection, Over/Under Frequency Protection, Hardware Overtemperature Protection, Self-Test Protection, etc. |
| DC-Side Protection | Bus Over/Under Voltage Protection, Hardware Overtemperature Protection, Battery Channel Line Reverse Connection Protection, etc. |
| Battery-Side Comprehensive Protection | Battery pack total voltage upper/lower limit protection, battery cell voltage upper/lower limit protection, battery temperature upper/lower limit protection, battery charge/discharge current upper limit protection, battery capacity upper/lower limit protection, BMS communication loss protection, network disconnection protection, etc. |
| Ingress Protection (IP) Rating | IP22 |
| Operating Temperature Range | 0ºC~ 45ºC |
| Cooling Method | Forced Air Cooling |
| Sound Level | ≤75dB |
Basic performance:
♦Charging function: with constant current and constant voltage charging function
♦Discharge function: with constant current discharge function
♦Charge and discharge interface: fully meet the requirements of the same port and separate port for charging and discharging the battery pack, that is, 2 wires (P+ P-) and 3 wires (P+ P- C-), and can age the positive electrode to protect the negative plate from discharging Protection type power tool battery (CH+ P+ P-)
♦Check voltage protection: by charging and discharging the battery, can check whether the battery's charge protection and
discharge protection work.
♦Record the charge and discharge capacity: charge and discharge the battery, and record the charge and discharge capacity of the battery.
♦Safety protection: anti-reverse connection protection function; voltage upper and lower limit setting protection; safe discharge current protection.
♦Serial port connection mode: If the instrument is single or less than 3, it can be connected to the PC through the serial port, which can reduce the complexity of using the instrument.
♦Network connection mode: If there are more than 3 instruments, the network connection mode can be used. The PC computer only needs to provide a network port to control less than 60 instruments.
♦Control system: The software system of the aging instrument adopts the classic and mature C/S mode, and the communication mode is serial port and network.
♦Management software: Based on Windows operating system, using SQL database to store test data, which greatly facilitates the staff to query and export data online. According to the battery bar code, time, and device number, you can view the charge and discharge aging curve, and you can also export the curve.
