ASTM D5481 High Temperature High Shear HTHS Viscosity Tester Automatic Apparent Viscosimeter Multicell Capillary Viscometer
Introduction
Under the test condition of 150ºC, the sample is made to flow out of the capillary viscometer under the pressure of nitrogen (or carbon dioxide). The apparent viscosity of the sample when the apparent shear rate of the capillary viscometer tube wall reaches 1.4x106s-1 can be obtained from the outflow time and pressure of the sample. The viscosity of the oil corresponding to the measured pressure can be determined by using the calibration curve of each viscometer cell.
Features:
1. Mainly used in the tester of gasoline engine oil index performance.
It has the advantages of accurate measurement, good repeatability, stable performance and simple operation.
2. The temperature control of the instrument is controlled by a high-precision intelligent digital temperature control meter, which has the advantages of high precision, strong anti-interference ability and long service life.
3. The instrument adopts a 7-inch color LCD screen display, the touch screen operation is convenient and fast, the display is intuitive, and the internal program adopts industrial-grade PLC control, and the system is stable.
4. The heating part of the instrument is made of aluminum alloy, and the aluminum heating belt is in close contact with the viscosity tube, and the heat is evenly heated. And it has a good insulation effect.
5. The pressure detection part adopts a precision pressure sensor, and the data is accurate and reliable.
Experimental process
Turn on the power button and the instrument will automatically heat up to 150ºC. Then click the screen to enter the test system interface. Select the appropriate pressure value based on the sample made by the reference standard. Then use a special threaded syringe to take 7ml of the sample and inject it into the viscosity tube from the top. Lock the valve and keep the temperature constant for 15 minutes. Draw out the excess sample and click the start button. The instrument will automatically measure the pressure change and record the time. The internal calculation program will automatically display and store the results. If the pressure value is incorrect, the system will recommend the appropriate pressure value before continuing the experiment to ensure the accuracy of the experimental data.
Applicable standards | ASTM D5481 SH/T0703 |
Heating method | electric heating rod heating |
Temperature control range | room temperature ~ 150ºC |
Control pressure range | 350kpa ~ 3500kpa |
Sample capacity | 7ml + 1ml |
Test unit | 1 unit |
Capillary viscometer size | ¢0.15 × 18mm |
Pressure display | touch screen display |
Time display | touch screen display |
Result calculation | machine comes with calculation |
Working power supply | AC220V 50HZ |


Located in Chongqing (one of the four municipalities directly under the Central Government of China), the electromechanical manufacturing center in Southwest of China. We specialize in the research, development, production and sales of oil filtration equipment, oil analyzers and electrical testing equipment
With 15 years of industry experience, we possess an independent R&D center and a complete technology-production-quality control system to ensure that products meet customers' requirements. The products are widely used in manufacturing, energy, transportation, construction and other industries, serving equipment maintenance and quality inspection scenarios. Up till now, we have established long-term cooperation with domestic and foreign customers in more than 100 countries.
- General Petroleum Products Testers
- 1. Karl Fisher Oil Water Content Tester
2.Digital Oil Moisture Meter
3.Petroleum Products Kinematic Viscosity and Viscosity Index Tester
4.Digital Kinematic Viscosity Meter
5. Fully Automatic Petroleum Products Acidity Meter
6.Cleveland Open Cup Flash and Fire Point Tester
7.Pensky-Martens Closed Cup Flash Point Tester
8.Pour Point and Cloud Point Tester
9.Petroleum Products Density Meter
10.Copper Corrosion Tester
11.Petroleum Products Aniline Point Tester
12.Petroleum Products Colorimeter
13.Petroleum Products Carbon Residue Tester (Micro Method)
14.Petroleum Product Vapor Pressure Tester (Reid Method)
15.Total Acid Number and Total Base Number TAN/TBN Tester
16.Petroleum Products X-ray Fluorescence XRF Sulfur Analyzer Sulfur
17.Petroleum Products Online Moisture Meter
18.Online Moisture ppm Meter/ Particle Counter/ Pollution Degree Analyzer
19.Petroleum Products Saponification Number Tester
20.Micro Coulometry Sulfur and Chlorine Content Tester
21.Ultraviolet Fluorescence Sulfur Analyzer
22.Conradson Method Petroleum Products Carbon Residue Tester
23.Ramsbottom(Electric Furnace) Method Petroleum Products Carbon Residue Tester
24.Hydrogen Sulfide in Liquefied Petroleum (LP) Gases Tester (Lead Acetate Method)
25.Hydrocarbon Types in Petroleum Products Tester by Fluorescent Indicator Adsorption - 2.Lube Oil Testers
1. Anti-rust Grease Salt Spray Corrosion Tester
2.Lube Oil Air Release Value Tester
3.Petroleum Products Demulsification/Water Separability Tester
4.Vehicle Gear Oil Channel Point Tester
5.Lube Oil Oxidation Stability Tester (Rotary Oxygen Bomb Method)
6. Lube Oil Foaming Characteristics Tester
7.Petroleum Products Ash Content Tester
8.Petroleum Products and Additives Mechanical Impurity Tester
9.Liquid Phase Corrosion/ Rust Preventing Characteristics Tester
10.Automatic Lubricating Oil Grease Four-ball Friction Tester
11.Lubricating Grease Sulfated Ash Content Tester
12.Water Content Tester by Distillation
13.Petroleum Products Water Soluble Acid and Alkalis Tester
14.Engine Oil CCS Cold Cranking Simulator/Apparent Viscosity Tester
15.Noack Method Lubricating Oil Grease Evaporation Loss Tester
16.Lubricating Oil Grease Evaporation Loss Tester
17.Lubricating Oil Insolubles Tester
18.Inhibited Mineral Oils Oxidation Characteristics Tester
19.Dropping Point Tester of Lubricating Grease Over Wide Temperature Range
20.Pressure Differential Scanning Calorimetry (PDSC) Lubricating Oil Oxidation Induction Time Tester
21.Lubricating Grease Dropping Point Tester
22.Lubricating Grease Cone Penetration Tester - Insulating Oil/Transformer Oil Testers
1. Karl Fisher Transformer Oil Water Content Tester
2.Digital Oil Moisture Meter
3.Automatic Transformer Oil Kinematic Viscosity and Viscosity Index Tester
4.Automatic Transformer Oil Kinematic Viscosity Meter
5.Transformer Oil Acidity Meter
6.Transformer Oil Cleveland Open Cup Flash and Fire Point Tester
7.Manual Type Transformer Oil Cleveland Open Cup Flash and Fire Point Tester
8.Transformer Oil Pensky-Martens Closed Cup Flash Point Tester
9.Manual Type Transformer Oil Pensky-Martens Closed Cup Flash Point Tester
10.Transformer Oil Pour Point and Cloud Point Tester
11.Transformer Oil Density Meter
12.Digital Transformer Oil Density Meter
13.Transformer Oil Colorimeter
14.Transformer Oil Breakdown Voltage/ Dielectric Strength Tester
15.Dielectric Loss/ Volume Resistivity Tester/Tan Delta/ Power Factor Tester
16..Fully Automatic Interface/ Surface Tensiometer - Transformer Tester
- 1.Transformer Turn Ratio Tester
- 2.Winding Resistance Tester
- 3.Transformer Load And No-load Tester TLNT
- 4.Transformer Turn Ratio Meter SP-T300
- 5.Capacitance and Dissipation Factor Tester /TanDelta Tester
Q1: Why Choose Super Mechanical?
(1).Exported to more than 90% Countries
(2).Turn-key Solution is no problem
Q2: Is OEM,ODM service available?
Most of the products are available for OEM customization.
Q3:What's kind of Payment terms for customer choosing?
Cash,T/T ,Western Union, Money Gram , Credit Card, Paypal , L/C ...
Q4:Can online video inspection before shipment?
Absolutely no problem
Q5: what's the MOQ ?
MOQ: MOQ can accept 1set
Q6:What's kind of shipment for customer choosing?
Transported by DHL, UPS, Fedex, Air freight,sea freight.
We can also provide reasonable solutions according to your transportation requirements
Q7.What kind of services can you provide?
Online support through email, telephone, Whatsapp or other communication method; onsite taining and installation if you need; filed maintenance and repair, technical video support, etc