KA-DP02
Microwave Sensor Switch
Microwave Sensor
PNP (Three-Wires)
Standard
Corridor,Basement,Toilet etc.
Square
ISO, RoHS, CE
2 Years
Within 2 Days
Within 10 Days
Customized Color Box or White Box
CE & RoHS
KAIAU
Standard Export Package
Square shape
Mainland China
85319010
Product Description
KA-DP02 HF Sensor specifications:
1. Power supply: 220-240VAC; 100-130VAC
2. Power frequency: 50/60Hz
3. Installation sit: Indoors, ceiling mounting
4. HF system: 5.8GHz CW radar, ISM band
5. Transmission power: < 0.2mW
6. Detection angle: 360°
7. Rated load: 1200W(220-240VAC); 600W(100-130VAC)
8. Reach: 1-8m(radii. ), adjustable
9. Time setting: 8sec to 12min
10. Light control: 2~2000LUX
11. Power consumption: Approx. 0.5W
Product introduction:
KA-DP02 is a moving object sensor that can detect range of 360° And it's working Frequency is 5.8G. The advantage of this product is stable working state (stable working Temperature: -15° C~+70° C), DP360S2 adopts a microwave sensor(high-frequency Output< 0.2mW), so that it is safe and performs better than infrared sensor.
It can be installed inside of product that is made of glass and plastic because that these Materials make little effect to microwave. Connect the product as shows below; You can Change a common light to an automatic light.
KA-DP02 Actual photo:
1. Power supply: 220-240VAC; 100-130VAC
2. Power frequency: 50/60Hz
3. Installation sit: Indoors, ceiling mounting
4. HF system: 5.8GHz CW radar, ISM band
5. Transmission power: < 0.2mW
6. Detection angle: 360°
7. Rated load: 1200W(220-240VAC); 600W(100-130VAC)
8. Reach: 1-8m(radii. ), adjustable
9. Time setting: 8sec to 12min
10. Light control: 2~2000LUX
11. Power consumption: Approx. 0.5W
Product introduction:
KA-DP02 is a moving object sensor that can detect range of 360° And it's working Frequency is 5.8G. The advantage of this product is stable working state (stable working Temperature: -15° C~+70° C), DP360S2 adopts a microwave sensor(high-frequency Output< 0.2mW), so that it is safe and performs better than infrared sensor.
It can be installed inside of product that is made of glass and plastic because that these Materials make little effect to microwave. Connect the product as shows below; You can Change a common light to an automatic light.
KA-DP02 Actual photo:
