Applications
This box allows to connect end-to-end, on field, a round or flat heating cable to a round power cable. However, it also makes it possible to connect together two round cables or two flat cables. The internal connection terminal block is in ceramic.
Main features
Material: Polyamide 66 black, total length 93mm. Good UV resistance.
Waterproof grade: IP66
Mounting:
- By 2 side brackets for wall mounting for 4 mm diameter screws, 35mm between axis.
- On the tube by a nylon tie. The lower part is concave to facilitate this assembly and the oblong holes of the legs
allow the passage and holding of a cable tie.
Terminal block:
- High temperature ceramic with screw terminals with captive toothed square washers accepting bare conductors
- 3 conductors, from 0.5 to 2.5mm².
- Maximum permissible intensity: 16A 250V.
Cable clamping: with M24 cable glands, with silicone gaskets.
- Maximum diameter of round cables: 12,5mm.
- Size limits of flat cables: from 10 x 3 to 13 x 6mm.
(comes with a set of different diameters).
Excellent cable retention at both ends.
Easy assembly: it is possible to slide the ceramic terminal block out of the body to connect the cables outside of it.
