LS-600H
Online
1 Year
Marking Vehicle
Asphalt Concrete Pavement
Mobile
Intermittent Compulsory
Automatic
40～400t/h
ISO9001: 2000, CE
New
75kg
Longshun
Export Wooden Case
1000*900*600mm
China
8479109000
Product Description
Hand-pushed Parking lot Paint Road Line Striping Marking Machine
The distance between the nozzle of the spray gun and the surface to be coated is called the gun distance, and the disance between the gun and the ground is 10-15 cm. If the gun distance is too small, the spraying pressure is too large, and the anti-impact force is also large, and burrs are prone to appear. If the gun distance is too large, the spraying will be too scattered and the edges will be uneven. And the spray width is too large, so that the partial spray material of the coated object is too small, and the coating film does not meet the thickness requirements.
CERTIFUCATIONS
Features:
1. The airless spray technology driven by a gasoline engine to drive a high-pressure jet pump is applied to the marking car in sports venues, and the jetting line is clear, smooth, full, uniform, and high efficiency.
2. There are stoppers at both ends of the spray gun to ensure that the cash has no burrs. When turning, the plate is raised by pulling the line and turning freely.
3. The spray gun is easy to disassemble, replace different nozzles, and control the width of different markings. It can be used for ordinary airless spraying and used as ordinary marks or signs.
| Working pressure | 39Mpa (3300psi) |
| Engine power | 5.5HP |
| Stroke width | 5-35cm |
| Marking speed | 130m/min |
| Thickness | 0.2-0.4cm |
| Usage | It is a special equipment for normal temperature marking construction |
The distance between the nozzle of the spray gun and the surface to be coated is called the gun distance, and the disance between the gun and the ground is 10-15 cm. If the gun distance is too small, the spraying pressure is too large, and the anti-impact force is also large, and burrs are prone to appear. If the gun distance is too large, the spraying will be too scattered and the edges will be uneven. And the spray width is too large, so that the partial spray material of the coated object is too small, and the coating film does not meet the thickness requirements.
CERTIFUCATIONS
