HDD Sonde Housing with Pilot Drill Bit (2 3/8"~6 5/8" FH)
Size:200mm~2000mm
Formation:suttable for sand and medium to very hard soil
Structure:steel casting,welded
Connection with drill rod:octagonal connection
Direct connection with drill rod
Connection with laid pipe:within or without swivel
Choose the suitable drill bit based on different soil condition to improve construction efficiency.
Good wearing, connviences to demount and maintain. Available for all makes ( Ditch Witch, Vermeer, Astec, others) and bolt hole patterns. 3.5", 4", 4.5" and 5" cut.
NOTE
- Please select the applicable formation and parameters according to the instructions.
- Carefully check the bits appearance and to check the bits threaded end face,whether the serial number on the box and certificate.
- Selection of WOB and RPM should be within the limits of the recommended parameters, higher WOB and RPM cannot be used simultaneously.
- Bottom hole must be clean and bit must not be used for long section reaming.
- Drilling process must operate smoothly, find that there is Bie jump on abnormal phenomenon, should be timely analysis and take effective measures.
- The bit should be kept indoor with dry and well ventilated conditions at 10-33ºC and kept from sunshine and rain. Stored under such conditions, quality of bit is guaranteed for 4 years.
Product Parameters
Pipe O.D.(mm) | Length(mm) | Loading Style | Connection | Bolt Configuration |
60 | 585 | End | To Order | To Order |
60 | 790 | Side | To Order | To Order |
73 | 614 | End | To Order | To Order |
73 | 1006 | Side | To Order | To Order |
73 | 1056 | Side | To Order | To Order |
89 | 814 | End | To Order | To Order |
Product Display



