GRE TUBING
Gre
Gre Tubing
10MPa-25MPa
Polymer Injection Wells
Sewage Reinjection Wells
Medium Temperature Piping
High Pressure Piping
Fluids With Solid Particle
Round
Seamless
Sy/T
DN40-DN100
IFGS. COM
Product Description
It is downhole GRE tubing which is made of high strength glassfiber as the reinforcement and epoxy resin as the base material.
Scope of Production
Diameter: DN40-DN100;
Pressure rating:10MPa-25MPa;
Can be designed and produced according to customer's requirements.
Product Standards
SY/T 7043 High Pressure Fiberglass Tubing for Petroleum and Natural Gas Industries SY/T 6267- 2006 Specification for High Pressure Fiberglass Line Pipe
Applications
Used for general water injection wells, sewage reinjection wells, polymer injection wells, etc..
Product Characteristics
Corrosion resistance, long service life, smooth inner wall, scale-proof and wax-proof.
| Spec. | Pressure rating | Thread spec. | Nominal ID | Couping OD | Nominal weight | Nominal length |
| in | MPa | in | mm | mm | kg/m | m |
| 2 | 16 | 2 3/8 | 48 | 84 | 2.5 | 9 |
| 20 | 2 3/8 | 48 | 92 | 2.9 | 9 | |
| 2 1/2 | 12 | 2 7/8 | 56 | 104 | 2.6 | 9 |
| 14 | 2 7/8 | 56 | 104 | 3 | 9 | |
| 16 | 2 7/8 | 56 | 104 | 3.5 | 9 | |
| 20 | 2 7/8 | 56 | 104 | 4.2 | 9 | |
| 3 | 17 | 3 1/2 | 62 | 107 | 4.2 | 8.7 |
| 20 | 3 1/2 | 62 | 107 | 4.4 | 8.7 | |
| 20 | 3 1/2 | 62 | 120 | 6 | 8.7 |
Note :
The above parameters are general information of our products and are design parameters based on special materials and technical status and cannot be used as inspection basis. In addition, our products are not limited to the above sizes and can be designed and manufactured as per customer demands.
Can be designed and produced according to customer's requirements.
