YDNC-200
1 Year Free Service and Life-Time Service
1 Year
AC Three Phase
Natural Gas
CE, ISO
＞200kW
Standard
220/380V
360A
1500/1800rpm
50/60Hz
CE ISO Saso
Woodward
Madas
Woodward
Woodward
Torch
Bosch
Brushless Alternator
YDNPOWER
for Open Type, Packing with Plywood Case; for Sile
Gas engine
Weifang China
8502200000
Product Description
| Genset Model | YDNC-200 | ||
| Rated Power (kW/kVA) | 200/250 | ||
| Rated Current (A) | 360 | ||
| Dimension (mm) | 2900*1100*2000 | ||
| Gross Weight (kg) | 3300 | ||
| Natural gas Engine | Brand | YDN | |
| Model | YDNT-855 | ||
| Configuration | Four-stroke,Water-cooling,Direct Injection,6L-type | ||
| Rated Power (kW/kVA) | 240/300(CH4 no less than 85%) | ||
| Rated Speed (rpm) | 1500 | ||
| Cylinder No. | 6.L | ||
| Bore*Stroke (mm) | 140×152 | ||
| Cooling Method | Water cooling | ||
| Oil Consumption (g/kw.h) | 1 | ||
| Gas Consumption (m3/h) | ≤60@100Load | ||
| Starting method | 24V DC | ||
| Gas control system | E-Throttle | BOSCH®(German Brand) | |
| MIXER | IMPCO®(USA Brand) | ||
| Regulator | MADAS®(Italian Brand) | ||
| Spark plug | TORCH®(China Brand) | ||
| Water temperature | BOSCH®(German Brand) | ||
| Alternator | Brand | FARRAND | |
| Model | FLD-200 | ||
| Rated Power (kW/kVA) | 200/250 | ||
| Material | High performance 100% copper | ||
| Efficiency | 94.50% | ||
| Voltage Regulation | <=±1 | ||
| Voltage Regulation | Brushles, Self Excitation | ||
| Insulation Class | H | ||
| Control System | Brand | SMARTGEN | |
| Model | HGM6110N | ||
| Working Voltage | DC8.0V to DC35.0V, continuous | ||
| Overall Dimensions (mm) | 197*152*47 | ||
| Panel Cutout (mm) | 186*141 | ||
| Working Condition | Temperature: (-25~70)ºC; Humidity: (20~90)% | ||
| Weight | 0.56kg | ||
Requirments for natural gas
1.Methane should be at least 85%
2.The natural gas temperature should be between 0-60 ºC
3. No inpurity should be in the gas. Water in the gas should be less than 20g/Nm3.
4. Heat value should be at least 8500kcal/m3, if less than this value, the power of the engine will be declined.
5. Gas pressure should be 8-14KPa, if the pressure is less than 3KPa, booster fan is necessary.
6.The gas should be dehydrated and desulfurated. Make sure that there is no liquid in the gas. H2S<200mg/Nm3
2.The natural gas temperature should be between 0-60 ºC
3. No inpurity should be in the gas. Water in the gas should be less than 20g/Nm3.
4. Heat value should be at least 8500kcal/m3, if less than this value, the power of the engine will be declined.
5. Gas pressure should be 8-14KPa, if the pressure is less than 3KPa, booster fan is necessary.
6.The gas should be dehydrated and desulfurated. Make sure that there is no liquid in the gas. H2S<200mg/Nm3
