gs
GS
GS
Acrylic
Transparent Plastic Sheet
0.1%~0.3%
＜0.4%
30~40MPa
Acrylic Sheet/PMMA(Plexiglass)
Cast Acrylic/Extrusion Acrylic
2-30mm
1.22 X 2.44m/2.05 X 3.05m
1.2g/cm3
100% Virgin Raw Material
Transparent/Clear, Colored for Choose
>92% for 100% Virgin Raw Material
Engraving Display, Kitchen & Bathroom Furniture
Acrylic Sheet/Plexiglass Sheets(PMMA)
Goldensign
Kraft Paper on Both Sides, Wooden Pallets
1.22 x 2.44M, 1.22 x 1.83M, 2.05 x 3.05M
China
3920510000
Product Description
Product Description
Acrylic board
Goldensign 3mm 5mm Clear Transparent Colored Cast and Extruded PMMA Plastic Acrylic Sheet
Introduction:
Acrylic board is named PMMA sheet or Organic glass sheet. The Chemical name is Polymethyl methacrylate.
Applications:
The products are widely used in engraving, advertisement sheet, instrument, parts of instrument, lamps, decoration, airplane, automobile fittings, medical appliances, work of art, insulation material for electrical appliances, specimen, sign board and various articles for light industry, culture and education, livelihood, etc.
Features:
1, Very good transparency
Organic glass plate is colorless and transparent. Its transparency is the foremost one in all plastics. Its transmittance is more than 92%.
2, Good weather resistance
Good adaptability to natural environment. Long time under sunlight, wind and rain, its property will not change. Good aging resistance, it can be used safely outdoors.
3, Good mechanical processability
Good dimension stability. The product will be beautiful and smooth after formation processing or fitting processing.
4, Light, safe in use
As compare with glass, it 's density is the half of that of glass, but the effects of use is just the same. Moreover, it will not scatter even if it should break, so it is safe in use. Just for this advantage, it is used widely as construction material to substitute ceramics.
5, Non-toxic
Long time contact with persons will cause no harm. Gases emitted during burning (under complete burning conditions, carbon dioxide and water vapor are formed) are not poisonous.
6, Easy to process
Very easy to carry out the secondary processing, such as heating processing, mechanical processing, vacuum shaping, printing and coating. High degree of freedom for design.
Goldensign 3mm 5mm Clear Transparent Colored Cast and Extruded PMMA Plastic Acrylic Sheet
Introduction:
Acrylic board is named PMMA sheet or Organic glass sheet. The Chemical name is Polymethyl methacrylate.
Applications:
The products are widely used in engraving, advertisement sheet, instrument, parts of instrument, lamps, decoration, airplane, automobile fittings, medical appliances, work of art, insulation material for electrical appliances, specimen, sign board and various articles for light industry, culture and education, livelihood, etc.
| Product Name | Goldensign Transparent Acrylic Sheets Acrilicos PMMA |
| Thickness(mm) | 1.5 - 50 |
| Width*length | 1250*1850;1250*2450;2050*3050mm |
| Density | 1.2 |
| Color | Clear, color, As requirement |
Features:
1, Very good transparency
Organic glass plate is colorless and transparent. Its transparency is the foremost one in all plastics. Its transmittance is more than 92%.
2, Good weather resistance
Good adaptability to natural environment. Long time under sunlight, wind and rain, its property will not change. Good aging resistance, it can be used safely outdoors.
3, Good mechanical processability
Good dimension stability. The product will be beautiful and smooth after formation processing or fitting processing.
4, Light, safe in use
As compare with glass, it 's density is the half of that of glass, but the effects of use is just the same. Moreover, it will not scatter even if it should break, so it is safe in use. Just for this advantage, it is used widely as construction material to substitute ceramics.
5, Non-toxic
Long time contact with persons will cause no harm. Gases emitted during burning (under complete burning conditions, carbon dioxide and water vapor are formed) are not poisonous.
6, Easy to process
Very easy to carry out the secondary processing, such as heating processing, mechanical processing, vacuum shaping, printing and coating. High degree of freedom for design.
