Switchgear
Cabinet
CE
Cabinet
Low Voltage
Stainless Steel
IP30
380V~660VAC
50Hz
L600kvar
0.85~1.1 Times Rated Voltage
1.3 Times Rated Current
1-16 Loops
Automatic,Continuous Operation
Wooden Case
China
8537209000
Product Description
GGJ Low Voltage Reactive Power Intelligent Compensation Device Switch Box Switchgear
GGJ low-voltage reactive power compensation device using computer-aided design (CAD), the introduction of microcomputer control, intelligent
implementation of intelligent tracking compensation, its reasonable structure, advanced technology, widely used in Low-voltage power grid, improve power factor, reduce reactive power loss, improve power supply quality, is a new generation of energy-saving products. Dedicated to the 130-600KVA three-phase transformer reactive power compensation.
The device accords with standards IEC439-1 and GB7251.1.
The device accords with standards IEC439-1 and GB7251.1.
Use environmental conditions
1) Altitude: W 2000m;
2) Ambient temperature: -20 ºC ~ +45 ºC;
3) Relative humidity: W 90% at 20 ºC;
4) Installation environment: no harmful gases and steam, no conductive or explosive dust and serious mold.
Distribution Network Detection Function
Distribution Network Detection Function
1) Real time measurement and hourly recording of three-phase voltage, current, frequency, active power, reactive power, power factor, active energy, reactive energy on the low-voltage side of transformers: total distortion rate of voltage and current and 2-25th harmonic content;
2) Equipped with RS-232 and RS-485 interfaces, it can record data from handheld computers and also achieve wireless meter reading, device testing, parameter setting, real-time measurement data, and record data reading through remote communication functions;
3) Data analysis function: It can analyze, process, and perform statistical queries on operational load data; Comprehensive analysis of power supply quality,calculation of voltage qualification rate, power supply load rate, reliability rate, and maximum load rate; Query power factor, active power, and reactive power in different time periods; Draw curves of voltage,current,power factor,etc.for each phase:print comprehensive analysis and statistical reports.
| Rated Voltage | 380V~660VAC |
| Rated Frequency | 50Hz |
| Rated Capacity | L600kvar |
| Application Voltage Range | 0.85~1.1 times rated voltage |
| Max.Allowable Current | 1.3 times rated current |
| Control Circuit | 1-16 loops |
| Work Time | Automatic,continuous operation |
1) Intelligent controller control, full-featured,Reliable performance, automatic compensation; can increase the power factor to 0.9 or more;
2) Real-time display power grid power factor, display range: lag (0.00-0.99), ahead (0.00-0.99);
3) With over-voltage, harmonic, over compensation, system failure, lack of phase, overload and other comprehensive protection;
4) Memory has been set parameters, the system will not lose the parameters after power failure, the grid back to normal, automatically enter the
running state, no personnel on duty;
5) According to the grid load balance, to take the phase compensation or mixed compensation;
6) Anti-interference ability, can withstand the direct input from the grid amplitude of 2000V interference pulse, higher than the national professional
standards.
