STJ18
Available
1 Year
Servo Indexing, 4-Stations
Max. 18mm
6~8 Seconds
3500~4000 Pieces Per Shift
Less Than 3% of Tube Od
About 11kw
Zhenhuan
Container
China
Product Description
Automatic Copper Tee Making Machine
I Description of automatic copper tee making machineAfter hydroforming, copper Tee should be furtherly processed: middle end cutting, three ends expanding and ordering:
This machine adopts servo indexing rotating arm structure, exchanging workpieces among four stations: loading/unloading, middle-end cutting, three-end expanding, three-end ordering (chamfering).
Blank tubes are fed into machine by vibrator feeder automatically:
This machine is PLC control, HMI operation, full automatic, only manual pouring blank tubes to the vibrator.
By changing tooling/moulds, different sizs Tees can be processed.
Grating ruler is provided for safety purpose.
II Main technical data of automatic copper tee fitting making machine
| Item | Data |
| Rotating arm structure | Servo indexing, 4 stations |
| Applicable copper tube diameter | Max. Φ 18mm |
| Cycle time | 6~8 seconds |
| Productivity | 3500~4000 pcs per 8 hours |
| Tube mouth deformation ratio | Less than 3% |
| Rotating servo motor power | 0.4kW |
| Middle end cutting motor power | 0.75kW |
| Three end ordering motor power | 0.75kW x 3 |
| Hydraulic pump motor power | 7.5kW |
| Hydraulic pressure | 20MPa |
| Pneumatic pressure | 0.5-0.7MPa |
| Cooling water | 0.2~0.3MPa, temperature≤32ºC, flow 120L/min |
| Machine dimension | About 3000 x 2150 x 2100mm |
| Machine weight | About 4000kg |
-- PLC: Mitsubishi from Japan
-- HMI: Weinview from Taiwan
-- Hydraulic valves: Yuken brand from China
-- Hydraulic seals: from brand from Europe
-- AC contactors: Schneider from China
IV Automatic copper Tee fitting making machines in our client's workshop
Our company can provide various copper fitting making machines for Tee, elbow, U, Y-joint, etc. Kindly please contact with us for any copper Tee fitting making machines.
