floating impeller aerator aquaculture equipment
Features
1. With simple design and convenient installment, it can be completely installed within 3 minutes. 2. It's light and convenient to move and power-saving .
3.It's unique impeller's cooperative parallelism is very stable .
4.Our material is stainless steel and super quality HDPE .So it can work in the water for long time .There is no need to worry about rusting .
Brief Introduction:
1.The round design of floating body can make the output water erupt upward to show us the boiling water at a certain area,enhance the water's contact with the air .It's eruption from the water surface aeration and the bottom surface dissolved oxygen and increase the water's aeration amount .
2.Secondly , in the process of the water's eruption, it passes the motor to let the motor and the gear box are kept in the state of water cooling .Then the motor is not hot after it works long to ensure the motor doesn't burn out with long time working and increase the electric current .
3.Tested by National Center for Quality Supervision of Fishing Machines, it's aeration function is higher than 2.3kg(O2)/KW.H. It's the fastest one among the products with domestically same power .
Main technical parameters(Executive Standard SC/T 6010-2001)
Model |
Motor power KW | Capacity of oxygen enrichment kg/h | Power efficiency kg/(h·kW) | Suit for water aera(M2) | Noise dB(A) |
FYL0.75 | 0.75 | ≥1.2 | ≥1.4 | 3333~6666 | ≤95 |
FYL1.5 | 1.5 | ≥2.3 | ≥1.5 | 6666~1333 | ≤100 |
