Advantage
1, Ideal for paint spraying and the application of sealants and protective coatings in automotive manufacturing
2, Erosion-resistance tungsten carbide orifice insert provides
3, Excellent Corrosion Resistance
4,High-impact flat spray pattern with tapered edges, provides even coverage when sprays overlap
5, Tip orifice inserts is recessed in a solid stainless steel tip body to protect against damage
Grade Information
Grade | Density g/cm3 | T.R.S MPa | Hardness HRA | Performance & Application recommended |
YL10.2 | 14.50 | 3400 | 92.5 | Qualified for low speed rough machining,milling,titanium alloy and refractory alloy,especially for cut-off tool and sick prick. |
YG3 | 15.20-15.40 | 1400 | 91.5 | Medium grain ,for finishing machining of cast iron and non-ferrous Metals |
YG6X | 14.90 | 1560 | 91.0 | Qualified for machining of chilled cast iron,alloy cast iron,refractory steel analloy steel.Also qualified for the machining of common cast iron. |
YS2T | 14.45 | 2800 | 92.5 | Qualified for low speed rough machining,milling,titanium alloy and refractory alloy,especially for cut-off tool and sick prick. |
YG3X | 15.20-15.40 | 1300 | 92 | Fine Grain ,for finishing machining of cast iron and non-ferrous metals |
High-Pressure TC Tips Performance Parameter
SprayAngle at 3 bar | Spray Tip No. | Equiv. Orifice Dia (mm) | Capacity *( liters Per Minute) |
| Appro.**Spray Pattern Width (cm) at 30cm Distance | ||
50 Bar | 100 Bar | 150 Bar | 200 Bar | ||||
110° | 110017-TC | .28 | .27 | .39 | .47 | .55 | 39 |
1100025-TC | .33 | .40 | .57 | .70 | .81 | 42 | |
1100033-TC | .38 | .53 | .75 | .92 | 1.1 | 43 | |
1100039-TC | .41 | .63 | .89 | 1.1 | 1.3 | 46 | |
100050-TC | .46 | .81 | 1.1 | 1.4 | 1.6 | 48 | |
1100067-TC | .53 | 1.1 | 1.5 | 1.9 | 2.2 | 53 | |
1100080-TC | .58 | 1.3 | 1.8 | 2.2 | 2.6 | 56 | |
11001-TC | .66 | 1.6 | 2.3 | 2.8 | 3.2 | 58 | |
110015-TC | .79 | 2.4 | 3.4 | 4.2 | 4.8 | 63 | |
11002-TC | .91 | 3.2 | 4.6 | 5.6 | 6.4 | 66 | |
11003-TC | 1.1 | 4.8 | 6.8 | 8.4 | 9.7 | 68 | |
11004-TC | 1.3 | 6.4 | 9.1 | 11.2 | 12.9 | 71 | |
11005-TC | 1.4 | 8.1 | 11.4 | 14.0 | 16.1 | 71 | |
110053-TC | 1.5 | 8.5 | 12.1 | 14.8 | 17.1 | 71 | |
11006-TC | 1.6 | 9.7 | 13.7 | 16.7 | 19.3 | 71 | |
11007-TC | 1.7 | 11.3 | 16.0 | 19.5 | 23 | 71 | |
11008-TC | 1.8 | 12.9 | 18.2 | 22 | 26 | 71 | |
11009-TC | 1.9 | 14.5 | 21 | 25 | 29 | 71 | |
11010-TC | 2.0 | 16.1 | 23 | 28 | 32 | 71 | |
11011-TC | 2.2 | 17.7 | 25 | 31 | 35 | 71 | |
11012-TC | 2.3 | 19.3 | 27 | 33 | 39 | 71 | |
65° | 650055-TC | .48 | .88 | 1.3 | 1.5 | 1.8 | 33 |
650067-TC | .53 | 1.1 | 1.5 | 1.9 | 2.2 | 38 | |
650080-TC | .58 | 1.3 | 1.8 | 2.2 | 2.6 | 38 | |
95° | 9503-TC | 1.1 | 4.8 | 6.8 | 8.4 | 9.7 | 56 |
